A CLEANER AND EASIER WAY WITH VAPOUR ABRASIVE BLASTING FOR MORE PROFITABLE AND DURABLE RESULTS

The EcoQuip 2, vapour abrasive blasting equipment is the latest innovation in abrasive blasting. Vapour abrasive blasting is similar to dry blasting, except that the blast media is moistened prior to impacting the surface and creates up to 92% less dust. EcoQuip 2 is available in portable or mobile self-contained models offering a solution for all sized jobs.
 

Vapour Abrasive Blasting

Wet abrasive blasting (also known as vapour abrasive blasting) removes coatings, contaminants, corrosion and residues from hard surfaces.

The main advantage of vapour abrasive blasting over dry blasting is that it reduces dust, permitting operators to work in an extensive range of environments with minimal setup and cleanup costs. Offering a cleaner, more consistent finished, ready to coat surface, with no embedded particles or clinging dust.



Compare abrasive blasting equipment wisely

When selecting wet abrasive blasting equipment, it’s important to know how long you want to blast before refilling the pot as well as what kind of production you will need.

Why are both of these so important? Because, unlike dry blasting, wet abrasive blasters are made up of different types of technology, so comparing machines with the same pot, hose and nozzle size doesn’t guarantee you get the same run time or production.

 

How does EcoQuip 2 vapour abrasive blasting work?

Water and abrasive media are combined in a blasting pot which is pressurized only by water and then precisely metered into the airflow. By encapsulating each blast particle with water, extra weight is added to the media which enlarges the impact of the blast media on the surface. By doing this the EcoQuip 2 creates a feathered profile with smooth edges, which results in proper paint adhesion.

Since EcoQuip 2 uses less water than slurry or other water-based technologies, pools of water aren't left behind so there is less need to worry about toxic runoff.

Why choose EcoQuip 2? 

  • Similar performance as sandblasting
  • Up to 92% less dust, minimizing tenting and containment
  • Up to 75% of blast media savings
  • Less restrictive PPE requirements
  • Reduced environmental impact
  • Uses far less water than wet blasting - no large slurry mess to clean-up

Vapour Abrasive Blasting Applications



Concrete Surface Preparation

Concrete Surface Preparation with Vapour Abrasive Blasting Equipment


Graffiti Removal

Graffiti Removal with Vapour Abrasive Blasting Equipment




Corrosion Control

Corrosion Control with Vapour Abrasive Blasting Equipment


Facade Renovation

Facade Renovation using Vapour Abrasive Blasting Equipment




Paint Coating Removal

Paint Coating Removal using Vapour Abrasive Blasting Equipment


Anti Fouling Surface Preparation

Anti Fouling Surface Preparation with Vapour Abrasive Blasting Equipment


Available models

Graco offers a variety of abrasive blasting equipment to meet your needs.

Small job size

EcoQuip 2 EQp

Graco’s new EcoQuip 2 EQp is ATEX approved and provides the operator with a range of pressure settings for any application. This affordable option in abrasive blasting is not only easy to use, but portable enough to take from one job to another.

Blast time 90 minutes
Max. Air Inlet Pressure 10.3 bar (150 psi, 1.03 Mpa)
Weight (dry) 100 kg
Atex certification ATEX approved units available
Pot Capacity 57 L
Vapour Abrasive Blasting Equipment for small sized jobs

Medium job size

EcoQuip 2 EQm

Graco’s EQm is a compact and fully portable unit. The unit is ATEX approved and is capable of handling any type of project, from cleaning to surface preparation.
 

Blast time 2 hours
Max. Air Inlet Pressure 10.3 bar (150 psi, 1.03 Mpa)
Weight (dry) 168 kg
Atex certification ATEX approved units available
Pot Capacity 99 L
Vapour Abrasive Blasting Equipment for medium sized jobs

Large job size

EcoQuip 2 EQs

Graco’s EcoQuip 2 EQs is a standalone unit designed to tackle most typical blasting projects. The EQs is built according to tough standards and can be stacked safely in a warehouse. Also available in EQs Elite models, for contractors who want the best.

Blast time 4+ hours
Max. Air Inlet Pressure 10.3 bar (150 psi, 1.03 Mpa)
Weight (dry) 485 kg
Atex certification ATEX approved units available
Pot Capacity 184 L
Vapour Abrasive Blasting Equipment for large sized jobs

Large job size

EcoQuip 2 EQs Dual Line

Graco’s EcoQuip 2 EQs Dual Line features two outlets and a large pressure pot capable of blasting up to four hours with two blasters at once. Get your project up and running quickly with this high production machine.
 

Blast time 4 hours with two blasters
Max. Air Inlet Pressure 10.3 bar (150 psi, 1.03 Mpa)
Weight (dry) 602 kg
Atex certification ATEX approved units available
Pot Capacity 340 L

 

Vapour Abrasive Blasting Equipment with high pot capacity for large sized jobs

Book your demo or find a distributor

Contact Our Experts

Your privacy is very important to Graco. We will not sell your information to other companies. However, to best serve your needs, your information may be shared with Graco's distributor partners. For details, view our Privacy Policy.