Graco Inc.

FinishPro II 395 PC  Air-Assisted Airless Sprayer

The features and output to quickly deliver high-quality finishes

Σημεία πώλησηςΑίτημα πληροφοριών
Fine Finish Application

With features that make a great sprayer even better, the FinishPro™ II 395 PC is Graco’s premier solution to fine finishing. It delivers a high quality finish at a high production rate, and can handle the most challenging materials.



  • Fast and easy on-the-job Pump Replacement System
  • 1-minute jobsite replacement in 3 simple steps
  • Pinless design eliminates the chance of losing parts during the change-out process
  • Endurance™ Now program available



  • Compressor is activated by the gun trigger—if you’re not spraying, it’s not running!
  • Reduces jobsite noise, resulting in less fatigue
  • Automatic shut-off reduces moisture entering the system and extends compressor life
  • Pulling trigger delivers instant air to the gun with zero lag
  • Release the trigger and SmartComp shuts off the compressor after 5 seconds
  • Extends compressor life
17C417, FinishPro II 395 PC Pro

High-Output On-Board Air Compressor

  • Ideal for on-site finish jobs
  • Delivers 3.2 cfm at 35 psi—enough air to break up the heaviest of materials
  • Exclusive Pressure Unloader results in quieter operation
  • Cooling coil reduces air temperature, extending the life of the critical compontents and providing safer operator handling

Endurance Pump

Endurance™ Pump

  • The most reliable pump on the market—lasts 2 times longer than the next leading brand
  • Long-life V-Max Blue™ packings, Chromex™ rod and hardened stainless steel cylinder
  • QuikAccess™ intake valve for fast cleaning or debris clearing
Material and air hose set

Super-Flex™ Hose Set—By increasing flexibility and maneuverability, Graco’s Super-Flex Hose Set enables you to work in tight confines and helps you increase the quality of finish you’re laying down.

  • The flexibility to get into tight spaces—focus on the task, not the tool!
  • Extremely lightweight in hand, which reduces fatigue
  • Connects directly to the gun for maximum flexibility
  • Flex Wrap hose skin protects from paint build up and increases hose durability
G40 Air-Assisted Airless Gun

Improved G40 Spray Gun

  • An industrial quality air-assisted spray gun that delivers superior finishing results
  • Integrated air valve improves gun handling
  • RAC X™ air cap included
  • Flat tip conversion kit included


SmartControl™ 1.0

  • Delivers a consistent spray fan without pressure fluctuation at all spraying pressures
  • Ideal for smaller tips commonly used for fine finish work
  • Digital display accurately shows spraying pressure

Two Sprayers in One!

  • Select air-assisted or airless modes, depending on what’s best for the application

Self-Contained & Portable

  • One plug runs the entire unit, simplifying jobsite operation

Single Selector Switch 

  • Simple, color-coded labels easily identify airless and air-assisted modes


  • G40 Gun Air-Assisted Airless Gun
  • 25 ft Super Flex Hose Set
    • 1/4 in x 25 ft (6,4 mm x 7,5 m) Fluid Hose
    • 1/8 in x 6 ft (3,2 mm x 1,8 m) Fluid Whip Hose
    • 3/8 in x 25 ft (9,5 mm x 7,5 m) Air Hose
    • 1/4 in x 6 ft (6,4 mm x 1,8 m) Air Whip Hose
  • RAC X FFT210 SwitchTip
  • RAC X LTX517 SwitchTip
  • Precision Cut Fine Finish Flat Tip Kit
  • AAM309 Flat Tip
  • 100 Mesh Gun Filter

FinishPro II 395 PC Airless/Air-Assisted Sprayers, Models: 17C417, 17C418, 17C421, 17C320, 17C321
Power requirements
★100/120V AC, 50/60 Hz, 15A, 1Ø
◆ 230V AC, 50/60 Hz, 10A, 1Ø
Generator Minimum
4000 W
4000 W
Maximum Tip Size
US★ / UK★
Europe◆ / Asia/Australia◆
Maximum material output gpm (lpm)
US★ / UK★
0.47 gpm
1.8 lpm
Europe◆ / Asia/Australia◆
0.54 gpm
2.0 lpm
Maximum material pressure – Airless
3300 psi
228 bar, 22.8 MPa
2800 psi
193 bar, 19.3 MPa
Europe◆ / Asia/Australia◆
3300 psi
228 bar, 22.8 MPa
Maximum material pressure – AA
US★ / UK★
2800 psi
193 bar, 19.3 MPa
Europe / Asia/Australia
3300 psi
228 bar, 22.8 MPa
Atomizing air output
US★ / UK★
3.2 cfm
3.2 cfm
Europe / Asia/Australia
2.9 cfm
2.9 cfm
Air pressure
35 psi
2.4 bar
32.5 in.
82.5 cm
21 in.
53.3 cm
40.5 in.
102.8 cm
Weight (bare)
110 lb.
49.9 kg
Noise** (dBa) level at 70 psi (4.8 bar, 0.48 MPa)
Sound pressure
79 dBa
79 dBa
Sound power
96 dBa
96 dBa
Materials of Construction.
Pump motor
Compressor motor
1.0 HP AC Induction
1.0 HP AC Induction
Material hose
1/4 in. x 50-ft (blue)
1/4 in. x 15.2 m (blue)
Air hose
3/8 in. x 50-ft (clear)
3/8 in. x 15.2 m (clear)
G40 w RAC X tip
G40 w RAC X tip
Wetted materials on all models
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, polyethylene, fluoroelastomer, urethane
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, polyethylene, fluoroelastomer, urethane
* Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Sound pressure measured 3 feet (1 meter) from equipment. Sound power measured per ISO-3744.