Vent Valves

Industry leading feature for your lube system needs

Vent valves are designed to be mounted to the G3 Electric Lubrication Pump to make it simple to install your injector based lube systems.

Easily mounts to your G3 pump.
Eliminates time and material costs associated with remote mounted vent valves
Available with 4 power options, 12 VDC, 24 VDC, 120 VAC, 230 VAC
Now available with normally closed and normally open valves for added convenience
The normally open valve works with the G3 Standard no control pump. With an external control just add power to the pump and valve to run a lube cycle, and remove power from both to vent pressure
The normally closed valve works with the G3 Max pumps controller, and vents pressure based on the time duration you program into the G3 control
Adjustable pressure relief is integrated into the valve, no need to purchase an additional relief valve
Power connections are DIN for AC models, and Deutcsh for DC models to meet typical application requirements

Direct Mount Vent Valve for G3 Pumps
	U.S. Metric
Maximum working pressure	3500 psi 24 MPa, 241 bar
Pressure Relief Valve
Factory Set Pressure	4000 psi + 10% 27.6 MPa, 275.8 bar + 10%
Reset Pressure	80% of pressure 80% of pressure
Relief Rate	0.13 gallons/sec @3000 psi 0.57 liters/sec @21 MPa. 207 bar
Solenoid Valve
Flow	Up to 5 gpm (18.9 lpm) Up to 5 gpm (18.9 lpm)
Materials of Construction
Wetted materials on all models	zinc plated steel, carbon steel, 6061 T6 aluminum, fluoroelastomer, polyurethane zinc plated steel, carbon steel, 6061 T6 aluminum, fluoroelastomer, polyurethane
Weight	37.72 oz. 1069.5 grams

Solenoid Coil	Resistance (DC) @ 68°F (20°C ) Initial Current Draw (Amps)
12 Volt DC	7.2 1.67
24 Volt DC	28.8 0.83
115 AC*	568 0.17
230 AC*	2304 0.09
* AC service coils are internally rectified and can be used in 50 or 60 Cycle (Hz) lines.
NOTE: AC voltage service with transient surges over 1000 volts may require a varistor to be placed in parallel with