- Specifically designed to accurately dispense shots of two-component epoxies, urethanes, silicone and most reactive resin systems
- Improved low viscosity spool design
- Rod positive displacement metering
- Precise mix ratio and shot repeatability
- Eliminates cleaning and potential hardening of materials in the valve
PD44 Patented Meter, Mix and Dispense Valve
For micro dispensing two-component materials
The Graco PD44 is specifically designed to dispense small amounts of water thin to paste viscosity materials from 0.005 cc's to 5 cc's. The metering rods are matched with machined seals for improved seal life.

Priručnici
- 313877G, Manual, PD44 Control Box, Setup-Operation, English (Samo engleski)
- 3A0987P, Manual, PD44 Metering Valves and Feed Systems, Parts, English (Samo engleski)
- 313876L, Manual, PD44 Metering Valves and Feed Systems, Operation-Maintenance, English (Samo engleski)
- 199307D PD44, EU-Declaration of Conformity (Samo engleski)
Literatura
PD44 | |
Maximum Ambient Temperature |
110°F
43°C
|
Maximum Operating Temperature |
150°F
65°C
|
Maximum Outlet Fluid Working Pressure |
2000 psi
138 bar, 14 MPa
|
Maximum Air Working Pressure |
100 psi
7 bar, 0.7 MPa
|
Maximum Material Inlet Pressure | |
Metal Sleeves |
1200 psi
83 bar, 8 MPa
|
Plastic Sleeves |
400 psi
28 bar, 2.8 MPa
|
Supplied Air Requirements |
1–3 cfm at 80–100 psi
1–3 cfm at 550 kPa, 5.5 bar - 7 bar, 0.7 MPa
|
Ratio Range (depending on metering rods selected) |
1:1 to 25:1
1:1 to 25:1
|
Shot Size Range (depending on metering rods selected) |
0.005 cc to 5.0 cc
0.005 cc to 5.0 cc
|
Maximum Cycle Rate per minute (application dependent) | |
Micrometer PD44 |
60 cycles
60 cycles
|
LRT PD44 |
60 cycles
60 cycles
|
Motor Driven PD44 (with standard Graco motor) |
15 cycles
15 cycles
|
Dimensions (H x L x W), height to end of material inlet | |
Micrometer PD44 |
17.5 x 4.13 x 7.57 in
445 x 105 x 192 mm
|
LRT PD44 |
14.5 x 4.13 x 7.57 in
368 x 105 x 192 mm
|
Motor Driven PD44 (with Graco motor) |
17.5 x 4.13 x 7.57 in
445 x 105 x 192 mm
|
Mixer |
4 - 14.75 in
102 - 375 mm
|
Smallest Graco-supplied Feed System Assemblies |
22.5 x 10 x 4 in
572 x 254 x 102 mm
|
Largest Graco-supplied Feed System Assemblies |
60 x 28 x 19 in
1524 x 711 x 483 mm
|
Weight | |
PD44 Metering Valve |
14–15 lb
6.35–6.80 kg
|
Valve stand only |
8 lb
3.6 kg
|
Feed Systems |
4–175 lb
1.8–79.4 kg
|
Sound Data, Sound data measured per standard ISO 11202 (1993) & ISO3746 (1995). | |
Sound Power Level |
76.5 dBA
76.5 dBA
|
Maximum Sound Pressure |
92.8 dB
92.8 dB
|
Wetted Parts | |
PD44 Metering Valve |
Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE
Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE
|
Graco-supplied Feed System Hoses and Fittings |
Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene
Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene
|
Graco-supplied Tanks |
Polyethylene, 303/304, mild steel
Polyethylene, 303/304, mild steel
|
-
Spajanje adhezivnim sredstvima
Spajanje je pridruživanje dva radna dijela pomoću tekućeg ili polutekućeg materijala da...
-
Hermetizacija
Hermetizacija je postupak zatvaranja ili osiguravanja dijela ili sklopa pomoću adhezivnog sredstva koje ...
-
Foamed-in-Place Gasketing
Equipment to create liquid gasketing from beads of two-component silicone or polyurethane
-
Filters
Adhesive handling equipment for bonding filter elements into assemblies
-
Encapsulation
Equipment that dispenses resins to protect electronic components from moisture and dirt
-
Potting
Equipment that dispenses resins to protect electronic components from moisture and dirt
-
Termalno upravljanje
Oprema koja raspršuje termalno provodljivi materijal na tiskane ploče sklopova
-
Plastična završna obrada - povezivanje