Graco Inc.

固定比率ハイドラキャット  機械式プロポーショナ

複連の下ポンプ設計で2液式材料を正確に配合します。

販売代理店情報資料請求

固定比率ハイドラキャット・プロポーショナは、共通のエアモーターから二つまたは3つの型ポンプに動力を供給することで、プルーラルコンポーネントの材料を正確にポンプで送ります。 このため、下ポンプ全てのストローク・レートおよびストローク長が確実に同調して、安定した定量供給が得られます。

同容量の2連の下ポンプを備えたモデルでは、バランスの取れたポンプ力が得られるのでパッキンの早期損耗を防ぎます。 3つの下ポンプとサイズの異なるシリンダーを持つモデルで選ぶことで、多種多様の混合比率を得ることが出来ます。.

ハイドラキャットのアップグレードをお考えですか? グラコのXPプルーラルコンポーネントスプレーヤーの種類をご覧ください。

  • 耐損耗と耐久性のための超強力下ポンプ
  • 複連の下ポンプ構成で多種多様の混合比率
  • 2連の下ポンプで定常1:1 の混合比率
  • 3連の下ポンプでバランスの取れた1:1 以上の混合比率
  • ハイドラキャットの下ポンプにはPTFEパッキン標準装備

マニュアル

President Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
0.3–0.7 MPa, 3–7 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 210 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 210 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, Tungsten carbide, fluoroelastomer
303 stainless steel, Tungsten carbide, fluoroelastomer
Sound, Tested in accordance with ISO 9614–2.
Sound pressure levels (dBa), (Input air pressures at 15 cycles/min.)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
Sound power levels (dBa), (Input air pressures at 15 cycles/min.)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. Xper minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.

Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
280–700 kPa, 2.8–6.37 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 207 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 207 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, tungsten carbide, fluoroelastomer
303 stainless steel, tungsten carbide, fluoroelastomer
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.