Graco Inc.

リアクター A-25  エア駆動のフォーム・プロポーショナ

発泡断熱材の吹き付け用 - 毎分最大塗装量 25ポンド(11.4 kg)

販売代理店情報資料請求

リアクター A-25は作業現場で求められる信頼性を提供する、グラコ設計の発泡材吹き付けプロポーショナです。 最大流量での吹き付けでも、温度の一定制御を維持するので、より高品質のフォームを提供します。

  • 生産性を高めるため温度の設定点を維持
  • 均等なスプレー・パターンを得るための定常な吐出圧
  • 容易な操作とメンテナンス
  • 手ごろな価格と耐久性の最適の選択



Reactor A-25 Plural Component Proportioner
Maximum Fluid Working Pressure
2000 psi
14 MPa, 138 bar
Maximum Air Supply Pressure
125 psi
0.9 MPa, 9 bar
Maximum Air Working Pressure
80 psi
550 kPa, 5.5 bar
Pressure Ratio
25:1
25:1
Air consumption with 02 tip at 1500 psi stall pressure
28 scfm
0.8m³/min
Machine Maximum Power with hose
9000 Watts
9000 Watts
Amperage Requirement (Full Load Peak)*
40 amps @ 230 V, 1 Phase; 32 amps @ 230 V, 3 Phase; 18.5 amps @ 380 V, 3 Phase
40 amps @ 230 V, 1 Phase; 32 amps @ 230 V, 3 Phase; 18.5 amps @ 380 V, 3 Phase
Maximum Heater Fluid Temperature
190°F
88°C
Maximum Hose Fluid Temperature
180°F
82°C
Maximum Ambient Temperature
120°F
49°C
Maximum Output
25 lb/min
11.4 kg/min
Output Per Cycle (A and B)
0.025 gal/cycle
0.095 ltr/cycle
Heater Power
6000 Watts
6000 Watts
Hose Power
2790 Watts
2790 Watts
Sound Pressure (see NXT air motor manual)
70.2 dB(A)
70.2 dB(A)
Sound Power (see NXT air motor manual)
80.1 dB(A)
80.1 dB(A)
Viscosity Range
250–1500 centipoise (typical)
250–1500 centipoise (typical)
Maximum Fluid Inlet Pressure
300 psi or 15% of output pressure
2.1 MPa, 21 bar or 15% of output pressure
Fluid Inlet/Strainer Filter
20 mesh standard
20 mesh standard
Air inlet Filter Mesh
40 Micron
40 Micron
Component B (Resin) Inlet
3/4 npt(f) swivel
3/4 npt(f) swivel
Component A (Isocyanate) Inlet
3/4 npt(f) swivel
3/4 npt(f) swivel
Recirculation/Block Hose Connections
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
Maximum Heated Hose Length ***
210 ft of 3/8 ID
210 ft of 3/8 ID
Weight
310 lb
140.6 kg
Wetted Parts
Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
Voltage Requirement Tolerance Range (50/60 Hz)
200–240 V ac Nominal, 1–Phase
195–253 V ac
195–253 V ac
200–240 V ac Nominal, 3–Phase Delta
195–253 V ac
195–253 V ac
350–415 V ac Nominal, 3–Phase Wye (200–240 V ac Line-to-Neutral)
338–457 V ac
338–457 V ac
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used, but will have 25% less heat capacity.