Graco Inc.

Fluid Commander 

電子式液体管理システム

販売代理店情報資料請求

この使いやすい電子式液体管理システムで、トランスミッション液、オイルおよび不凍液の事前に設定された量を正確にディスペンスします。

  • 機械式カウンターを凌ぐ高精度を提供します。
  • PINコードが許可のないディスペンシングを防ぎます
  • 位置により追跡される総ディスペンス量
  • 最大2液体をディスペンスします

Electronic Dispensing Control
Fluid System Max. Working Pressure
1500 psi
103 bar, 10.4 MPa
Power Input
110/120 volt, 60 Hz
110/120 volt, 60 Hz
Main Supply Voltage Fluctuations
Not to exceed + 10% of the nominal voltage
Not to exceed + 10% of the nominal voltage
Circuit Breaker
0.40 amp
0.40 amp
Totalizing Unit of Measurement
Gal to 19999
l to 19999
Dispensing Unit of Measurement
0.01 increments up to 199.99 Pints, Quarts, Gallons, or Liters
0.01 increments up to 199.99 Pints, Quarts, Gallons, or Liters
Power Supply Cord
7.5 ft, 18 AWG, 3 conductor, molded vinyl plugs, 125 Vac,
2.3 m, 18 AWG, 3 conductor, molded vinyl plugs, 125 Vac,
Control Power Output
24 Vdc nominal at 0.60 amp maximum to any (1) fluid valve and any (1) air valve simultaneously
24 Vdc nominal at 0.60 amp maximum to any (1) fluid valve and any (1) air valve simultaneously
Backup Battery
Lithium, 3.6 volt, 1.0 amp hour capacity (not replaceable)
Lithium, 3.6 volt, 1.0 amp hour capacity (not replaceable)
Internal Fuses
2.5 amp, 250 volt, non-serviceable
2.5 amp, 250 volt, non-serviceable
Operating Temperature Range (If the control is operated at higher ambient temperatures, periods of no flow must be more frequent and longer to prevent overheating.)
+41°F to +104°F
+5°C to +40°C
Storage Temperature Range
–20°F to +150°F
–28°C to +65°C
Maximum Relative Humidity
80% for temperatures up to 88°F, decreasing linearly to 50% relative humidity at 104°F
80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C
Installation Category
II, indoor use only
II, indoor use only
Altitude
Up to 6562 ft
Up to 2000 m
Pollution Degree
2
2
Control Dimensions
Length
8 in
203 mm
Width
10 in
245 mm
Height
4 in
102 mm
Weight
4.5 lb
2.0 kg