ハスキー 716ダブル・ダイヤフラム・ポンプ 19.1 mmの容積式ダブルダイヤフラムポンプ
19.1 mmの接合部は、アルミニウムおよびSSTでお求めいただけます。
この19.1 mmのダブルダイヤフラムポンプには、遠隔操作のための外部コントローラが付属しており、アルミニウム、316ステンレススチール構造でご用意しています。
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
Benefits of the Husky 716 double diaphragm pumps
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Overview | |
Maximum fluid flow |
16 gpm (61 l/min)
|
Maximum Fluid Discharge Pressure |
100 psi (7 bars, 0.7 MPa)
|
Maximum size pumpable solids |
3/32 in (2.5 mm)
|
Fluid displacement per cycle |
0.04 in (0,64 liter) |
Husky 716 Performance

Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:
- Step 1 – Go to our Pump Selector Tool
- Step 2 – Fill in your pumps part number in the right corner
- Step 3 – Get an overview of all repair kits and accessories for your pump.
Contact Us
For more information or to connect you with a
distributor in your area!
- 19.05 mmセンターおよびエンド・ポーティング
- シールなしで、漏れや不良なし
- 85 dBa以下で稼動し、使いやすい遠隔マフラで騒音を抑えています
- 容易に修理できるエアバルブとボールチェック
マニュアル
Husky 716 Air-Operated Diaphragm Pumps | |
Maximum Fluid Working Pressure |
100 psi
7 bar, 0.7 MPa
|
Air Pressure Operating Range |
30 to 100 psi
2.1 to 7 bar, 0.2 to 0.7 MPa
|
Maximum air consumption |
28 scfm
0.672 m³/minute
|
Maximum free-flow delivery |
16 gpm
61 lpm
|
Maximum pump speed |
400 cpm
400 cpm
|
Gallons (Liters) per cycle |
0.04
0.15
|
Maximum suction lift (water with buna balls) |
15 ft dry, 25 ft wet
4.5 m dry, 7.6 m wet
|
Maximum size pumpable solids |
3/32 in
2.5 mm
|
Operating Temperature Range (These temperatures are based on mechanical stress only and may be altered significantly by pumping certain chemicals. Consult engineering guides for chemical compatibilities and temperature limits, or contact your Graco distributor. Santoprene® is a registered trademark of the Monsanto Company. Loctite® is a registered trademark of the Loctite Corporation.) | |
Minimum, all pumps |
40°F
4°C
|
Maximum, acetal pumps |
180°F
82°C
|
Maximum, polypropylene pumps |
150°F
66°C
|
Maximum, aluminum, stainless steel, PVDF pumps |
225°F
107°C
|
Sound power level (measured per ISO standard 9614–2) | |
At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute |
77 dB(A)
77 dB(A)
|
At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute |
95 dB(A)
95 dB(A)
|
Sound pressure level (measured 1 m from pump) | |
At 70 psi (4.8 bar, 0.48 MPa) at 50 cycles per minute |
67 dB(A)
67 dB(A)
|
At 100 psi (7 bar, 0.7 MPa) at maximum cycles per minute |
85 dB(A)
85 dB(A)
|
Inlet/Outlet Sizes | |
Air inlet size |
1/4 npt(f)
1/4 npt(f)
|
Air exhaust port size |
3/8 npt(f)
3/8 npt(f)
|
Fluid inlet size |
3/4 npt(f), bspt(f), or bspp(f)
3/4 npt(f), bspt(f), or bspp(f)
|
Fluid outlet size |
3/4 npt(f), bspt(f), or bspp(f)
3/4 npt(f), bspt(f), or bspp(f)
|
Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump) | |
Aluminum pumps |
aluminum, stainless steel, PTFE, zinc-plated steel
aluminum, stainless steel, PTFE, zinc-plated steel
|
Stainless steel pumps |
316 stainless steel, PTFE
316 stainless steel, PTFE
|
Non-wetted external parts | |
All pumps |
polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet)
polypropylene, stainless steel, polyester (labels), nickel-plated brass, epoxy-coated steel (feet)
|
Weight | |
Aluminum pumps |
8.5 lb
3.9 kg
|
Stainless steel pumps |
18 lb
8.2 kg
|
関連する製品
-
Husky 2150 Air-Operated Diaphragm Pumps
The Husky 2150 has a 2 inch (50.8 mm) connection and is available in polypropy...
-
サイクルフローとサイクルフロー II
ポンプ速度、運転時間、吐出量の正確な管理
-
ハイドラクリーン高圧洗浄機
工業およびサニタリー設備における効率的な洗浄に最適
-
ハスキー 1050ダブルダイヤフラムポンプ
25.4 mmの接合部をアルミニウム、ポリプロピレン、導電性ポリプロピレン、PVDF、ステンレススチール、ハステロイ製でご用意しています。
-
ハスキー 3300ダブルダイヤフラムポンプ
76.2 mmの接合部をアルミニウム、ポリプロピレン、ステンレススチール製でご用意しています。