For drivetrain gasketing, the Graco Dispense Analyzer helps you find and correct the smallest of errors - before your customers find them for you. Learn more!
PCF計量システム 精密な継続フロー計測および供給システム
アドバンスト閉ループ技術は正確で継続的な材料の流れを確実にします。
極めて優れたフロー制御により材料浪費を低減
材料供給システムとロボット・プラットフォームと併せて、グラコ PCF 計量システムは正確で継続的な材料の流れを確実にします。 閉ループ技術は材料温度、粘度、調整、供給速度またはロボット速度の変化に対するリアルタイムでの調整を行い、極めて正確で継続的な供給を提供します。 システムコンポーネントに含まれるもの: アドバンスト表示モジュール、流体プレート、グラコ CANケーブル、およびゲートウェイ
様々な材料に対応:
• 400°F (204°C)以下の、環境温度、ウォームメルト、およびホットメルトの材料
• 低~高粘度の材料
• 量の制限なし


次世代の精密計測
- 閉ループの"リアルタイム"制御は正確で継続的な供給を確保して、部品の品質を高めて材料の浪費を低減します。
- 直観的なユーザー・インターフェースでセットアップが簡素化し、トレーニングに要する時間を短縮
- 一体型USBインターフェースはデータのダウンロードが簡単で、プロセスデータの詳細分析を可能にします。
- さらなる生産性に向けた複数ガン機能 - 4つまでのガンのプログラムが可能
- コンパクトなモジュール式設計 - インストール、一体化、管理が簡単
- 低い所有経費 - ショット測定器と比べてより少ない損耗部品
マニュアル
資料
その他のリソース
PCF | |
Minumum Flow Rates |
25 cc/min with high-resolution (ambient) helical flow meter, 50 cc/min with heated helical flow meter
25 cc/min with high-resolution (ambient) helical flow meter, 50 cc/min with heated helical flow meter
|
Maximum Flow Rates |
7500 cc/min with high-resolution (ambient) helical flow meter, 22,500 cc/min with heated helical flow meter, 37,500 cc/min with separate flow meter
7500 cc/min with high-resolution (ambient) helical flow meter, 22,500 cc/min with heated helical flow meter, 37,500 cc/min with separate flow meter
|
Minimum Fluid Working Pressure (at regulator outlet) |
100 psi
0.7 MPa/7.0 bar
|
Air Supply Pressure Range |
60–120 psi, 10 Micron filtration required
0.4 – 0.8 MPa/4.1 – 8.3 bar, 10 Micron filtration required
|
Fluid Filtration Required |
30 mesh minimum
500 micron minimum
|
Viscosity Range of Fluids |
10000 to 1000000 cps with helical flow meter
10000 to 1000000 cps with helical flow meter
|
Minimum Dispensed Shot Size |
3 cc with high-resolution (ambient) helical flow meter, 6 cc with heated helical flow meter
3 cc with high-resolution (ambient) helical flow meter, 6 cc with heated helical flow meter
|
Wetted Parts (meters and fluid plates) |
303, 304, 321, 17–4 stainless steel, tungsten carbide, PTFE, steel, fluoroelastomer
303, 304, 321, 17–4 stainless steel, tungsten carbide, PTFE, steel, fluoroelastomer
|
Power Supply Voltage Range |
100–240 Vac, 50–60 Hz, single phase
100–240 Vac, 50–60 Hz, single phase
|
Operating Humidity Range |
0 – 90% non-condensing
0 – 90% non-condensing
|
Operating Temperature Range | |
Control Center |
40°F to 120°F
4°C to 49°C
|
Heated Fluid Plate |
40°F to 400°F
4°C to 204°C
|
204 CAmbient Fluid Plate |
40°F to 120°F
4°C to 49°C
|
Power Requirements | |
100–240 Vac |
full load 1.4A, fuse rating-2.5A
full load 1.4A, fuse rating-2.5A
|
240 Vac |
full load-4A, fuse rating-4A
full load-4A, fuse rating-4A
|
Maximum Fluid working pressure | |
Feed Pressure to Fluid Plate (cartridge regulator) |
6000 psi
41.1 MPa/414 bar
|
Feed Pressure to Fluid Plate (mastic regulator) |
5000 psi
34.5 MPa/345 bar
|
At regulator outlet |
4500 psi
31.0 MPa/310 bar
|
At regulator outlet with electric heat components |
3500 psi
24.1 MPa/241 bar
|
-
防錆
-
接着剤ボンディング
ボンディングは2つのワークピースを液体または半液体物質を用いて結合し、長期間持続する接合を形成します。
-
自動車でのヘムフランジ・ボンディング
自動車用メタルのボンディング方法
-
シール
シールは、液体および空気に対して気密性を有する接着剤を使用して、部品またはアセンブリを塞いだり固定するプロセスです。
-
現場発泡式ガスケッチング
2成分シリコンまたはポリウレタンのビードから液体ガスケッチングを生成するための装置
-
ケーブルフィル
ケーブル接続部および端子を包み込み、シールするための装置
-
樹脂バッチ混合
樹脂を調合し、高温の融けた樹脂をディスペンスするための装置
-
樹脂浸透
2成分のエポキシまたはホット・メルト用装置