Graco Inc.

리액터 E-20 및 E-30  전기 폼 혼합장치

중-고출력 폼 단열 분사용 - 분당 최대 30 lb(13.6 kg) 도포

구매처정보 요청
공유 |

도료 데이터 및 시스템 진단 기능을 갖춘 리액터 E-20과 E-30 혼합 장치는 폼 단열 분사를 위한 완전한 제어를 제공합니다. 고급 기능을 통해 더 긴 장비 수명과 도장 작업 가동 시간, 그리고 사용자가 기대하는 Graco 장비의 전반적인 신뢰성 및 내구성을 제공합니다.



Spray foam insulation

Equipped with material data and system diagnostics, the Reactor E-20 proportioner provides total control for spraying foam insulation. Advanced features provide longer equipment life, more uptime for your spray day, and the overall Graco reliability and durability you've come to expect.

그 어느 때보다 더 빠르고 안정적으로 작업을 완성

  • 더 나은 온도 제어를 제공하는 강력한 하이브리드 히터
  • 장기 수명의 씰이 부착된 순환 밸브
  • 작동 정지 시간을 최소화하는 장기 수명의 모듈식 히터 제어판
  • 탭 설정이 필요 없는 호스 열 변환기
  • 손쉬운 조작
  • 유지보수가 간편한 퀵 녹다운 하부 펌프
  • 디지털 방식 열/압력 제어
측정 단위로 값 보기. 미국 달러로 가격 보기.



Reactor E-20, E-30, E-XP1, E-XP2 Series
Maximum Fluid Working Pressure
Models E-20 and E-30: 2000 psi, Model E-XP1: 2500 psi, Model E-XP2: 3500 psi
Models E-20 and E-30: 14 MPa, 140 bar, Model E-XP1: 17.2 MPa, 172 bar, Model E-XP2: 24.1 MPa, 241 bar
Maximum Fluid Temperature
190°F
88°C
Maximum Output
Model E-20: 20 lb/min, Model E-30: 30 lb/min, Model E-XP1: 1 gpm, Model E-XP2: 2 gpm
Model E-20: 9 kg/min, Model E-30: 13.5 kg/min, Model E-XP1: 3.8 liter/min, Model E-XP2: 7.6 liter/min
Output per Cycle (A and B)
Model E-20 and E-XP1: 0.0104 gal., Model E-30: 0.0272 gal., Model E-XP2: 0.0203 gal.
Model E-20 and E-XP1: 0.0395 liter, Model E-30: 0.1034 liter, Model E-XP2: 0.0771 liter
Amperage Requirement
See Table 1, page 20 in manual 312065
See Table 1, page 20 in manual 312065
Heater Power
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Sound Power, per ISO 9614–2
Model E-20: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 93.5 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 83.5 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 93.5 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 83.5 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Sound Pressure 1 m from equipment
Model E-20: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 83.6 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 73.6 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 83.6 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 73.6 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Fluid Inlets
3/4 npt(f), with 3/4 npsm(f) union
3/4 npt(f), with 3/4 npsm(f) union
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
Weight
Model E-20 and E-XP1: 342 lb, Model E-30: 400 lb, Models E-XP2 and E-30 with 15.3kW of heat: 438 lb
Model E-20 and E-XP1: 155 kg, Model E-30: 181kg, Models E-XP2 and E-30 with 15.3kW of heat: 198 kg
Wetted parts
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Voltage Tolerance Range (50/60 Hz)
200–240 V ac Nominal, 1 Phase
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
200–240 V ac Nominal, 3 Phase Delta
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
350–415 V ac Nominal, 3 Phase Wye (200–240 V ac Line-to-Neutral)
338–457 V ac, 50/60 Hz
338–457 V ac, 50/60 Hz
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.