GL-43 오일 주입기 고성능 주입기
사용하는 기기의 모든 윤활 지점에서 정확하고, 안정적인 윤활 가능
Graco의 GL-43 오일 주입기 시스템은 일체형 설계로 설치가 용이하고 신속한 셋업이 가능하며 윤활 시스템을 재 설계할 필요 없이 윤활 지점을 추가하거나 삭제할 수 있습니다. 낮은 점도의 윤활유를 처리합니다.
- 고장 없는 성능을 위해 보다 오래 지속되는 실링 설계
- 까다로운 환경에서 안정적으로 작동하기 위한 정밀 호닝 부품
- 조정식 출력량을 .001 - .008 큐빅 인치(0.02-0.13 cm3)로 조정할 수 있어 각 윤활 지점의 요건에 맞게 시스템을 사용자 지정 맞춤합니다
- 인젝터가 제대로 기능하는지를 빠르게 확인할 수 있는 편리한 전면 장착 사이클 핀 표시기
- 낮은 점도의 윤활제(최소 중량 #10)로 최적의 성능을 발휘하기 위한 사용 압력 범위는 750-1000 psi(52-69 bar)
- 독립식 인젝터 및 매니폴드 시스템의 교체형 인젝터 모두로 제공되어 사용하는 적용 분야에 따라 인젝터를 사용자 지정 맞춤할 수 있습니다
GL-32 (Grease) and GL-43 (Oil) Injectors | |
Oil Models | |
Maximum Operating Pressure |
1000 psi
68.9 bar, 6.89 MPa
|
Minimum Operating Pressure |
750 psi
51.7 bar, 5.17 MPa
|
Suggested Operating Pressure |
850 psi
58.6 bar, 5.86 MPa
|
Reset Pressure |
150 psi
10.3 bar, 1.03 MPa
|
Output Volume per Cycle |
adjustable: 0.001 - 0.008 cubic in
adjustable: 0.001 - 0.008 cubic in
|
Wetted Parts |
carbon steel, stainless steel, copper, fluoroelastomer
carbon steel, stainless steel, copper, fluoroelastomer
|
Recommended Fluids |
Minimum SAE 10 weight oil (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details)
Minimum SAE 10 weight oil (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details)
|
Grease Models | |
Maximum Operating Pressure |
3500 psi
241 bar, 24 MPa
|
Minimum Operating Pressure |
1200 psi
83 bar, 8.3 MPa
|
Suggested Operating Pressure |
2500 psi
172 bar, 17 MPa
|
Reset Pressure |
200 psi
14 bar, 1.4 MPa
|
Output Volume per Cycle |
adjustable: 0.001 - 0.008 cubic in
0.016 - 0.131 cc
|
Wetted Parts |
carbon steel, stainless steel, copper, fluoroelastomer
carbon steel, stainless steel, copper, fluoroelastomer
|
Recommended Fluids |
Grease N.L.G.I. grades #000 - #2 (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details.
Grease N.L.G.I. grades #000 - #2 (Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature. Consult with machine and lube manufacturer for details.
|
관련 제품
-
G3 Max
DMS 옵션을 포함한 풀 사양
-
G3 Standard
사용하는 PLC와 호환
-
G3 프로
내장형 컨트롤러
-
GL-1 그리스 주입기
가장 까다로운 적용 분야에 적합한 고압 고용량 출력
-
GL-11 그리스 주입기
가장 까다로운 적용 분야에 적합한 고압 고용량 출력
-
GL-32 그리스 주입기
사용하는 기기의 모든 윤활 지점에서 정확하고, 안정적인 윤활 가능
-
GL-33 Grease Injectors
Accurate, reliable lubrication for every lube point on your machine
-
GL-42 Oil Injectors
Accurate, reliable lubrication for every lube point on your machine
-
GLC 4400 컨트롤러
자동 윤활 시스템 관리가 용이합니다
-
배출 밸브
사용자의 윤활 시스템 요건에 맞는 산업 주도적 사양
-
압력 스위치
윤활 부속품