맨젤 모델 HP-50 고압 주유기
압축기 및 써큘레이터 실린더 외벽, 중량의 베어링 및 기타 유동 부품 윤활 시
싱글 플런저 포스 공급 설계는 윤활유 및/또는 호환 가능한 유체를 고압 시스템에 주입할 경우 매우 효율적입니다. 자급식 펌핑 장치의 진공 확인 공급은 각 윤활 지점에 대한 윤활유의 출력을 표시합니다.
- 작동하는 모든 부품은 완전 밀폐되며 자체 윤활됩니다
- 각 펌핑 장치는 정비 시 쉽게 분리됩니다
- 단순한 수동 조작 시 최소에서 최대로 무한 가변적인 공급 속도
매뉴얼
자료
HP50 High Pressure Lubricators | |
Plunger Diameter |
1/4 in
0.64 cm
|
HP-50 Maximum Operating Pressure |
50,000 psi
3,447 bar, 344 MPa
|
Reservoir Capacity |
9 quarts from centerline of top gauge glass to centerline of bottom gauge glass
8.5 liters from centerline of top gauge glass to centerline of bottom gauge glass
|
Maximum Pumping Rate based on SAE 40 oil — (approx. 4 drops) |
0.008 in³ per stroke
0.133 cc per stroke
|
Minimum Pump Rate |
0.001 in³ at max. pressure
0.017 cc at max. pressure
|
Reservoir Heating (optional) |
Steam or Electric
Steam or Electric
|
Lubricant Viscosity |
100 to 5000 SUS
100 to 5000 SUS
|
Operating Temperature |
-200°F to 1200°F
-129°C to 649°C
|
Construction Materials | |
Reservoir and Cover |
Heavily ribbed cast iron
Heavily ribbed cast iron
|
Cylinder |
Hardened alloy steel, precision-honed
Hardened alloy steel, precision-honed
|
Plunger |
Hardened alloy steel, precision-ground
Hardened alloy steel, precision-ground
|
Valves |
Poppet type, flat face, hardened and ground alloy steel
Poppet type, flat face, hardened and ground alloy steel
|
Valve Seats |
Hardened and ground alloy steel
Hardened and ground alloy steel
|
Driveshaft |
Integral crankshaft type, hardened, ground and polished alloy steel, machined from solid bar
Integral crankshaft type, hardened, ground and polished alloy steel, machined from solid bar
|
Bearings |
Bronze bushed, high load capacity, long-life, self-lubricating type
Bronze bushed, high load capacity, long-life, self-lubricating type
|
Regulating Lever |
Forged steel
Forged steel
|