Graco Inc.

허스키 1590 이중 다이어프램 펌프  1.5 인치 용적형 이중 다이어프램 펌프

폴리프로필렌, 아세탈, PVDF, 알루미늄 및 SST 재질의 1-1/2 인치(38.2 mm) 연결부

구매처정보 요청
공유 |

이 1-1/2 인치 이중 다이어프램 펌프에는 온라인 서비스가 가능하며 가혹한 환경에 적합하도록 에어 섹션이 에폭시 코팅된 높은 신뢰성의 특허출원 폐심형 에어 밸브가 제공되어 있습니다.

The Husky 1590 air operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.

The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

Benefits of the Husky 1590 double diaphragm pumps

  • Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
  • Expanded material offering to handle endless applications
  • Fewer parts than industry peers, the air valve is externally accessible so it can be serviced fast and easy without uninstalling the diaphragm pump
  • Offered in ATEX configuration.
Overview
Maximum fluid flow
100 gpm (378.5 l/min)
Maximum Fluid Discharge Pressure
120 psi (8,4 bars, 0,84 MPa)
Maximum size pumpable solids
3/16 in (4.8 mm)
Fluid displacement per cycle
0.5 g (1,9 liter)

Husky 1590 Performance

Husky 1590 Fluid Flow

Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:

  • Step 1 – Go to our Pump Selector Tool
  • Step 2 – Fill in your pumps part number in the right corner
  • Step 3 – Get an overview of all repair kits and accessories for your pump.

 

Process Pump Selector
Chemical Compatibility Guide

Contact Us

Graco는 귀하의 프라이버시를 중시하며 귀하의 정보를 다른 회사에 판매하지 않습니다. 하지만 최상의 서비스를 제공해 드리기 위해 귀하의 정보를 Graco의 배포 파트너와 공유합니다. 자세한 내용은 개인정보보호 정책에서 확인하시기 바랍니다.

  • 1-1/2 인치(38.2 mm) ANSI 엔드-포팅
  • 고유량 - 소형 휴대형 사이즈의 100 gpm(378 lpm)
  • 120 psi(8.4 bar, 0.84 MPa)에 달하는 유체 압력
  • 윤활유-Free 작동
  • 폴리프로필렌, 키나, 알루미늄 및 스테인리스강 재질
  • 가혹환 환경 조건에 적합한 에폭시 코팅 에어 섹션

매뉴얼

자료

기타 자원

측정 단위로 값 보기. 미국 달러로 가격 보기.

Husky 1590 Aluminum and Stainless Steel Air-Operated Diaphragm Pump
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20-120 psi
1.4-8 bar, 0.14-0.8 MPa
Maximum air consumption
125 scfm
125 scfm
Air consumption at 70 psi/60 gpm
50 scfm (see instruction manual chart)
50 scfm (see instruction manual chart)
Maximum free-flow delivery
100 gpm
378.5 l/min
Maximum pump speed
200 cpm
200 cpm
Gallons (liters) per cycle
0.5 gal
1.9 l
Maximum suction lift
18 ft wet or dry
5.48 m wet or dry
Maximum size pumpable solids
3/16 in
4.8 mm
*Maximum noise level at 100 psi, full flow
94 dBa
94 dBa
*Sound power level
108 dBa
108 dBa
*Noise level at 70 psi, 50 cycles/min
72 dBa
72 dBa
Maximum Operating Temperature
Models without PTFE Diaphragms
150°F
65.5°C
Models with PTFE Diaphragms
200°F
93.3°C
Air inlet size
0.5 npt(f)
0.5 npt(f)
Fluid inlet size
1.5 npt(f)
1.5 npt(f)
Fluid outlet size
1.5 npt(f)
1.5 npt(f)
Wetted parts
Vary by model, see instruction manual
Vary by model, see instruction manual
Non-wetted external parts
Aluminum, 302, 316 stainless steel, polyester (labels)
Aluminum, 302, 316 stainless steel, polyester (labels)
Weight
Aluminum Pumps
33.5 lb
15.2 kg
Stainless steel pumps with aluminum center section
71 lb
32.7 kg
Stainless steel pumps with stainless steel center section.
86 lb
40 kg
Geolast® is a registered trademark of the Exxon Mobil Chemical Co. Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite corporation. * Noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452. *Sound power measured per ISO Standard 9216.

Husky 1590 Polypropylene and PVDF Air-Operated Diaphragm Pumps
Maximum fluid working pressure
120 psi
8.4 bar, 0.84 MPa
Air pressure operating range
20-120 psi
1.4-8.4 bar, 0.14-0.84 MPa
Maximum air consumption
125 scfm
125 scfm
Air consumption at 70 psi/60 gpm
50 scfm (see chart in manual)
50 scfm (see chart in manual)
Maximum free flow delivery
100 gpm
378.5 lpm
Maximum pump speed
200 cpm
200 cpm
Gallons (liters) per cycle
0.5 gal
1.9 l
Maximum suction lift
18 ft wet or dry
5.48 m wet or dry
Maximum size pumpable solids
3/16 in
4.8 mm
*Maximum noise level at 100 psi, 50 cpm
94 dBa
94 dBa
Sound power level
108 dBa
108 dBa
*Noise level at 70 psi 50 cycles/min
72 dBa
72 dBa
Maximum Operating Temperature
150°F
65.5°C
Air inlet size
1/2 npt(f)
1/2 npt(f)
Fluid inlet size
1–1/2 in, raised face flange
1–1/2 in, raised face flange
Fluid outlet size
1–1/2 in, raised face flange
1–1/2 in, raised face flange
Wetted parts
Vary by model. See manual.
Vary by model. See manual.
Non-wetted external parts
Aluminum, 302 and 316 stainless steel polyester (labels)
Aluminum, 302 and 316 stainless steel polyester (labels)
Weight
Polypropylene Pumps with aluminum center section
35 lb
16 kg
PVDF Pumps with aluminum center section
49 lb
22 kg
Polypropylene Plus Pumps with stainless steel center section
49 lb
23 kg
PVDF Pumps with stainless steel center section
63 lb
30 kg
® and Santoprene® are registered trademarks of the Monsanto Co. Loctite® is a registered trademark of the Loctite corporation.* Noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452. Sound power measured per ISO Standard 9216.