- 신속한 분해를 위한 위생 플랜지 클램프
- 125 Ra 마감의 위생 숏블라스트 처리된 접액부
- 모든 접액부는 FDA 승인을 획득했으며 CFR 타이틀 21을 충족
- 밀폐형 또는 노출형 제어장치의 모델로 제공
SaniForce 2150 세니터리 드럼 언로더 고위생 이중 다이어프램 드럼 언로더
스테인리스강 유체 말단 부, 125 Ra 마감의 2.5 인치(6.3 cm) 3중 클램프 연결부를 5분 내에 분해할 수 있습니다.
팽창식 램 플레이트 실이 기본으로 제공되는 SaniForce 2150 세니터리 드럼 언로더는 빈 용기를 신속하게 교체할 수 있으며 재료를 희석하지 않고도 99%의 배출 속도를 제공합니다.
Available in CE1935/2004 - check manual for configuration
와이퍼 실:
- FDA 승인을 획득한 네오프렌 팽창식 램 플레이트 실
- 빈 용기의 교체가 훨씬 신속
- 99% 배출 속도
- 백이 펌프로 유입되는 것을 방지하는 라이너 가드
매뉴얼
자료
- 338590EN-E SaniForce Drum Unloader Flyer [기타 언어]
- 345028EN SaniForce Container Evacuation Solutions (영어만 해당)
- 338940EN PTFE/EPDM Overmolded Diaphragms [기타 언어]
- 345067EN Sanitary Overview Flyer [기타 언어]
- 344796EN-G SaniForce Equipment Catalog [기타 언어]
- 344855KO-G SaniForce 세니포스 [기타 언어]
- FDA Material Certification (영어만 해당)
338940EN PTFE/EPDM Overmolded Diaphragms
345067EN Sanitary Overview Flyer
| Sanitary Drum Unloaders | |
| Maximum Working Fluid Pressure | |
| 5:1 Ratio Piston Pumps |
410 psi
28.3 bar, 2.8 MPa
|
| 6:1 Ratio Piston Pumps |
650 psi
44.8 bar, 4.5 MPa
|
| 12:1 Ratio Piston Pumps |
1450 psi
100.0 bar, 10 MPa
|
| Diaphragm Pumps |
120 psi
8.2 bar, 0.8 MPa
|
| Maximum Air Inlet Pressures | |
| Piston Pump Ram Packages |
100 psi
6.9 bar, 0.7 MPa
|
| Diaphragm Pump Ram Packages |
120 psi
8.0 bar, 0.8 MPa
|
| Ram |
100 psi
6.9 bar, 0.7 MPa
|
| 6:1 and 12:1 Ratio Piston Pumps |
100 psi
6.9 bar, 0.7 MPa
|
| 5:1 Ratio Piston Pumps |
80 psi
5.5 bar, 0.6 MPa
|
| Diaphragm Pumps |
120 psi
8 bar, 0.8 MPa
|
| Air Inlet Size | |
| Enclosed Controls |
1/2 npt(f)
1/2 npt(f)
|
| Exposed Controls |
3/4 npt(f)
3/4 npt(f)
|
| Maximum Ram Package Operating Temperature | |
| 5:1 Ratio Piston Pump Ram Packages |
140°F
60°C
|
| All Other Ram Packages |
150°F
66°C
|
| Maximum/Minimum Drum Sizes | |
| Maximum Drum ID |
24 in
61 cm
|
| Minimum Drum ID — straight sided |
19.4 in
49 cm
|
| Minimum Drum ID — tapered` |
19.0 in
48 cm
|
| Maximum Drum Height |
40.75 in
104 cm
|
| Wetted Parts | |
| Inflatable Seal |
Neoprene
Neoprene
|
| Ram (plate, fittings, gaskets) |
300–Series stainless steel, Buna-N, and polypropylene
300–Series stainless steel, Buna-N, and polypropylene
|
| 5:1 Ratio Piston Pumps (see pump manual) |
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
|
| 6:1 Ratio Piston Pumps (see pump manual) |
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
|
| 12:1 Ratio Piston Pumps (see pump manual) |
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Stainless steel, acetal, nitrile, PTFE, UHMWPE
|
| Diaphragm Pumps (see pump manual) |
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
|
| Noise Data | |
| All Models |
See your pump manual.
See your pump manual.
|
| SaniForce 2150 Diaphragm Pumps | |
| Maximum fluid working pressure |
120 psi
8 bar, 0.8 MPa
|
| Air pressure operating range |
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
|
| Maximum air consumption |
175 scfm
5 m³/minute
|
| Air consumption at 70 psi, 50 gpm |
70 scfm
2.0 m³/minute
|
| Maximum free-flow delivery |
160 gpm
568 lpm
|
| Maximum pump speed |
165 cpm
165 cpm
|
| Gallons/liters per cycle* |
0.97 g
3.7 l
|
| Maximum suction lift |
29 ft wet, 16 ft dry
8.8 m wet, 4.9 m dry
|
| Maximum size pumpable solids |
1/4 in
6.3 mm
|
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow |
95 dB(A)
95 dB(A)
|
| Sound power level |
102 dB(A)
102 dB(A)
|
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm |
84 dB(A)
84 dB(A)
|
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings | |
| PTFE |
220°F
104°C
|
| Santoprene® |
180°F
82°C
|
| EPDM |
275°F
135°C
|
| Polychloroprene |
200°F
93°C
|
| Stainless Steel |
250°F
121°C
|
| Inlet/Outlet Sizes | |
| Air inlet size |
0.5 in npt(f)
0.5 in npt(f)
|
| Fluid inlet size |
2.5 in sanitary flange
2.5 in sanitary flange
|
| Fluid outlet size |
2.5 in sanitary flange
2.5 in sanitary flange
|
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. | |
| Wetted materials on all models |
316 stainless steel
316 stainless steel
|
| Wetted materials depending on model |
EPDM, Polychloroprene, PTFE, Santoprene
EPDM, Polychloroprene, PTFE, Santoprene
|
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts |
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
|
| Weight | |
| FD2 Models |
147 lb
66.7 kg
|
| FA1 Models |
141 lb
64 kg
|
| Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1.*** The pump user must verify that the construction materials meet their specific application requirements. | |
관련 제품
-
SaniForce 1040 이중 다이어프램 펌프
유량이 40 gpm(151 lpm)에 달하는 1 인치 에어 작동식 이중 다이어프램 펌프 - 식품 관련 용도에 적합
-
SaniForce 3150 HS 이중 다이어프램 펌프
최대 4 인치 3중 클램프 연결부가 있는 이 펌프는 분해가 신속한 디자인의 편의성이 유용한 용도에 적합합니다. 150 gpm(568 lpm)에 달하는 최대 유량.
-
SaniForce 5:1 위생 피스톤 펌프
100,000 cps의 최대 점도와 최대 14 gpm(53 lpm)의 배출 속도.
-
SaniForce BES
수동으로 퍼내거나 빈을 쏟아 붓지 않고 300 갤론(1135 l) "백인빈(bag-in-the-bin)" 용기에서 점성 재료를 비우는데 적합합니다.