- Highest technology air motor on the market
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- External valve access allows for easy servicing and online replacement to minimize downtime
- Operator Control Panel located at operator height for easy setting and monitoring
- Throat seal and rod enclosure protects pumped material and wet cup from contamination but can be easily removed to monitor and service
Merkur Air-Assist and Airless Packages High Performance Fine Finish Pump Packages
Airless and air-assisted fine finish pump packages to improve productivity, reduce costs & lower emissions
Achieve the right flows at the right pressures to fit all of your spraying needs. With four air motor sizes and 13 different models to choose from, the new and improved Merkur fine finish pump packages are designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.
The Merkur pump packages are proven to outperform and outlast other pumps in their class.
Vadovai
- 312797Y, Manual, Merkur Non-Heated Spray Packages Instructions/Parts, English [kitos kalbos]
- 312798R, Merkur Electrostatic Spray Packages, Instructions/Parts, English [kitos kalbos]
- 313255R, Merkur Heated Spray Packages, Instructions/Parts, English [kitos kalbos]
- 312794K, Merkur Pump Assembly, Instructions and Parts, English [kitos kalbos]
- 312792H, Merkur Displacement Pump, Repair/Parts, English [kitos kalbos]
- 312796S, NXT Air Motor, Instructions and Parts, English [kitos kalbos]
- Flat Line Spray Systems Kits, Instructions/Parts Manual, 3A1203B, English (Tik anglų k.)
- 199271K, Merkur Pumps and Non Heated Packages, EU-Declaration of Conformity, English (Tik anglų k.)
- 199293G, Merkur Heated Packages, EU-Declaration of Conformity, English (Tik anglų k.)
- 199082H, Viscon HP Fluid Heater, Hazardous Location, 318-162 EC-Declaration of Conformity (European Community) English (Tik anglų k.)
- 199138L, XTR 5 AND XTR 7 Airless Guns, EU-Declaration of Conformity, English (Tik anglų k.)
312797Y, Manual, Merkur Non-Heated Spray Packages Instructions/Parts, English
312798R, Merkur Electrostatic Spray Packages, Instructions/Parts, English
313255R, Merkur Heated Spray Packages, Instructions/Parts, English
312794K, Merkur Pump Assembly, Instructions and Parts, English
312792H, Merkur Displacement Pump, Repair/Parts, English
Literatūra
- 340004ENEU-F Merkur [kitos kalbos]
- 344795EN Wood Finishing Solutions (Tik anglų k.)
- 344899ENEU Flat Line Pump Spray Packages and Kits [kitos kalbos]
- Graco Merkur Ordering Information (Tik anglų k.)
- 300737ENEU Marine Equipment [kitos kalbos]
340004ENEU-F Merkur
344899ENEU Flat Line Pump Spray Packages and Kits
Kiti ištekliai
| Merkur Displacement Pumps | |
| Maximum Operating Temperature |
160°F
71°C
|
| Stroke Length |
2.5 in
64 mm
|
| Wetted Parts |
Stainless Steel, Tungsten Carbide, UHMWPE, PTFE
Stainless Steel, Tungsten Carbide, UHMWPE, PTFE
|
| Maximum Working Fluid Pressure | |
| Model LW025A |
3000 psi
207 bar, 20.7 MPa
|
| Model LW050A |
4500 psi
310 bar, 31.0 MPa
|
| Model LW075A |
4800 psi
331 bar, 33.1 MPa
|
| Model LW100A |
3600 psi
248 bar, 24.8 MPa
|
| Model LW125A |
2900 psi
200 bar, 20.0 MPa
|
| Model LW150A |
2400 psi
165 bar, 16.5 MPa
|
| Fluid Inlet Size | |
| Model LW025A |
1/2 npt
1/2 npt
|
| Model LW050A, LW075A, LW100A |
3/4 npt
3/4 npt
|
| Model LW125A, LW150A |
1 npt
1 npt
|
| Fluid Outlet Size | |
| Model LW025A, LW050A, LW075A, LW100A |
3/8 npt
3/8 npt
|
| Model LW125A |
1/2 npt
1/2 npt
|
| Model LW150A |
3/4 npt
3/4 npt
|
| Merkur Non-Heated Spray Packages | |
|
U.S.
Metric
|
|
| Maximum fluid working pressure |
See Models table on page 6.
See Models table on page 6.
|
| Maximum pump air inlet pressure |
100 psi
(0.7 MPa, 7.0 bar)
|
| Maximum gun air inlet pressure |
100 psi
(0.7 MPa, 7.0 bar)
|
| Ratio |
See Models table on page 6.
See Models table on page 6.
|
| Ambient air temperature range |
35°F–120°F
(2°C–49°C)
|
| Maximum fluid temperature |
160°F
(71°C)
|
| Sound data |
See Technical Data in air motor manual 312796
See Technical Data in air motor manual 312796
|
| Wetted parts |
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE. Spray gun: See Manual 3A0149 (AA guns) or Manual 312145 (XTR guns). Fluid hoses: nylon. Suction assembly: stainless steel, nylon. Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE. Spray gun: See Manual 3A0149 (AA guns) or Manual 312145 (XTR guns). Fluid hoses: nylon. Suction assembly: stainless steel, nylon. Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
|
| Merkur Electrostatic Spray Packages | |
|
U.S.
Metric
|
|
| Maximum Fluid Working Pressure |
See Models table in instruction manual
See Models table in instruction manual
|
| Maximum Fluid Inlet Pressure(Bellows) |
15 psi
0.1 MPa, 1.0 bar
|
| Maximum Pump Air Inlet Pressure |
100 psi
0.7 MPa, 7.0 bar
|
| Maximum Gun Air Inlet Pressure |
100 psi
0.7 MPa, 7.0 bar
|
| Ratio |
See Models table in instruction manual
See Models table in instruction manual
|
| Ambient Air Temperature Range |
35-120°F
2-49°C
|
| Maximum Operating Temperature |
120°F
49°C
|
| Sound Data |
See Technical Data in air motor manual 312796.
See Technical Data in air motor manual 312796.
|
| Wetted Parts (displacement pump) |
See manual 312792 (Merkur) or 312793 (Merkur Bellows).
See manual 312792 (Merkur) or 312793 (Merkur Bellows).
|
| Wetted Parts (spray gun) |
See manual 3A2495.
See manual 3A2495.
|
| Wetted Parts (fluid hoses) |
nylon
nylon
|
| Wetted Parts (suction assembly) |
stainless steel, nylon
stainless steel, nylon
|
| Wetted Parts (fluid filter) |
See manual 307273.
See manual 307273.
|
| Wetted Parts (drain valve) |
stainless steel, nylon
stainless steel, nylon
|
| Merkur Heated Spray Packages | |
|
U.S.
Metric
|
|
| Maximum fluid working pressure |
See Models table on page 5
See Models table on page 5
|
| Maximum pump air inlet pressure |
100 psi
0.7 MPa, 7.0 bar
|
| Maximum gun working pressure |
100 psi
0.7 MPa, 7.0 bar
|
| Ratio |
See Models table on page 5.
See Models table on page 5.
|
| Ambient air temperature range |
35°F–120°F
(2°C–49°C)
|
| Maximum fluid temperature |
160°F
(71°C)
|
| Sound data |
See Technical Data in air motor manual 312796
See Technical Data in air motor manual 312796
|
| Wetted parts |
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE. Spray gun: See Manual 3A0149 (AA guns) or Manual 312145 (XTR gun). Fluid hoses: nylon. Suction assembly: stainless steel, nylon. Fluid filter: See Manual 307273. Heater: Stainless steel. Back pressure regulator: See Manual 306860. Back pressure valve: See Manual 307892. Drain valve: stainless steel, nylon
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE. Spray gun: See Manual 3A0149 (AA guns) or Manual 312145 (XTR gun). Fluid hoses: nylon. Suction assembly: stainless steel, nylon. Fluid filter: See Manual 307273. Heater: Stainless steel. Back pressure regulator: See Manual 306860. Back pressure valve: See Manual 307892. Drain valve: stainless steel, nylon
|
