ChemSafe 307 Air-Operated Double Diaphragm Pumps 0.375 inch High Purity Pumps
Chemical transfer pumps with 3/8 inch (9.5 mm) connection available in PTFE and UHMWPE
Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
- Max flow rate of 7.9 gpm (30 lpm)
- High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
- Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
- Removable air motor offers easy and intuitive maintenance ensuring maximum pump performance and availability
- Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater
- Use our Online Chemical Compatibility Guide to select the proper pump material for your chemical
Rokasgrāmatas
Literatūra
- 345070ENEU-A ChemSafe [citas valodas]
- 345076EN-A AODD Chemical Transfer Applications (Tikai angļu valodā)
Citi resursi
- CAD Drawing (2D) - ChemSafe 307 (Tikai angļu valodā)
- CAD Drawing (3D) - ChemSafe 307 (Tikai angļu valodā)
- ChemSafe FAQ's
ChemSafe 307 Diaphragm Pump | |
Maximum fluid working pressure |
100 psi
0.69 MPa, 6.9 bar
|
Minimum air startup pressure |
30 psi
0.21 MPa, 2.1 bar
|
Fluid inlet and outlet size |
3/8 npt
3/8 bspt
|
Maximum suction lift (reduced if balls don’t seat well due to damaged balls or seats, lightweight balls, or extreme speed of cycling) |
Wet: 31.2 ft, Dry: 10 ft
Wet: 9.5 m, Dry: 3 m
|
Maximum size pumpable solids |
0.08 in.
2 mm
|
Minimum recommended ambient air temperature for operation and storage. NOTE: ChemSafe pumps may be operated in low temperature environments. Take care to avoid freezing or crystallization of the fluid inside or outside of the pump. Running the pump at temperatures below freezing may accelerate the wear of the elastomer components in the pump. |
32° F
0° C
|
Air consumption at maximum flow |
9.3 scfm
0.26 scmm
|
Fluid flow per cycle |
0.011 gallons
0.04 liters
|
Maximum free-flow delivery |
6.7 gpm
25.4 lpm
|
Maximum pump speed |
610 cycles per minute
610 cycles per minute
|
Weight |
6 lb
2.7 kg
|
Wetted Parts |
PTFE, EPDM, NBR, UHMWPE
PTFE, EPDM, NBR, UHMWPE
|
Maximum fluid temperature | |
PTFE Pumps |
212° F
100° C
|
UHMWPE Pumps |
158° F
70° C
|
Noise (dBa), Sound power was measured per ISO-9614–2: 1997. Sound pressure was tested 3.28 ft (1 m) from the equipment. | |
Sound Power | |
At 100 cycles per minute |
51.7 dBa
51.7 dBa
|
At 610 cycles per minute |
58.1 dBa
58.1 dBa
|
Sound Pressure | |
At 100 cycles per minute |
61.5 dBa
61.5 dBa
|
At 610 cycles per minute |
67.7 dBa
67.7 dBa
|
-
Antifrīzs
-
Gela pārklājumi
-
Asfalts
-
Poliuretāns
-
Vējstikla mazgātāja šķidrums
-
Dīzeļdegvielas izplūdes gāzu neitralizēšanas līdzeklis (DEF – Diesel Exhaust Fluid)
-
Mazgāšanas līdzekļi
-
Ūdens – notekūdeņu attīrīšana
-
Ūdens – notekūdeņu pārsūknēšana
-
Pārtikas produkti, personiskā higiēna un farmācija
-
Tintes un krāsotāji
-
Ķimikāliju pārsūknēšana
Ķimikāliju pārsūknēšanas sūkņi un izvades aprīkojums
-
Vidējas viskozitātes materiālu pārsūknēšana
Plašs sūkņu klāsts nedaudz plūstošam materiālam santehnikas un rūpniecības...
-
Zemas viskozitātes materiālu pārsūknēšana
Ērti pārsūknējiet šķidrumus un šķīdumus, izmantojot Graco rūpnieciskos un sa...
-
Tintes pārsūknēšana
Divu lodīšu un gruntējuma virzuļsūkņi tintes ražošanai un drukas vajadzībām
-
Solar Energy
Sealant and adhesive dispensing equipment for solar panel manufacturing
-
Kosmētika
-
Ķimikāliju izgatavošana
-
Elektronisko ierīču izgatavošana
-
Vannas istabas piederumu un keramikas izstrādājumu izgatavošana
-
Augšup plūstoša straumē: ražošanas aprīkojums
-
Lejup plūstošā straumē: rafinēšanas fabrikas
-
Drukāšana un publicēšana – tintes pārsūknēšana
-
Ūdens – notekūdeņu attīrīšana
-
Ūdens – notekūdeņu pārsūknēšana
-
Tintes pārsūknēšana
Saistītie produkti
-
ChemSafe 1590 Air-Operated Double Diaphragm Pumps
Chemical transfer pumps with 1.5 inch (38.1 mm) connection available...
-
ChemSafe 205 Air-Operated Double Diaphragm Pumps
Chemical transfer pumps with 1/4 inch (6.3 mm) connection available i...
-
Husky 205 Air-Operated Double Diaphragm Pumps
The Husky 205 has a 1/4 inch (6.3 mm) connection and is available in pol...
-
Husky 307 Air-Operated Double Diaphragm Pumps
The Husky 307 has a 3/8 inch (9.52 mm) connection and is available in po...
-
Husky 3300 Air-Operated Diaphragm Pumps
The Husky 3300 has a 3 inch (76.2 mm) connection and is available in aluminum,...