- Air cap allows for easy cleaning of the purge rod
- Lightweight design reduces operator fatigue
- Pattern control knob allows for fine tune adjustments
D-Gun Plural-Component Spray Guns
Ideal for low to medium output foam applications
The Graco D-Gun is ideal for small to midrange output foam applications such as interior stud-wall spraying.
- A variety of mixing chamber sizes allows the operator to fine-tune the round spray pattern for virtually any application
- Lightweight, easy to operate and maintain
- Mechanically self-cleaning so you eliminate costly solvent-flushing

Manuales
Model D Spray Gun | |
Dimensions | |
Height |
8 in
20 cm
|
Width (without coupling block) |
2.4 in
6 cm
|
Length |
9.25 in
24 cm
|
Weight |
3 lbs
1.4 kg
|
Maximum Fluid Working Pressure |
1000 psi
7 MPa, 70 bar
|
Maximum Air Inlet Pressure |
100 psi
0.75 MPa, 7.5 bar
|
Minimum Air Inlet Pressure |
90 psi
0.6 MPa, 6 bar
|
Maximum Output (flow rate) |
16 lbs/min*
7.3 kg/min*
|
Minimum Output (flow rate) |
2 lbs/min*
0.9 kg/min*
|
Air Inlet Size |
x npt
x npt
|
A Component (ISO) Inlet Size |
-5 JIC; 1/2-20 UN
-5 JIC; 1/2-20 UN
|
R Component (Resin) Inlet Size |
-6 JIC; 9/16-18 UNF
-6 JIC; 9/16-18 UNF
|
* Theoretical: actual results will vary with operating conditions |
Productos relacionados
-
Reactor A-25
Para pulverizar aislantes de espuma - aplica hasta 25 lb (11,4 kg) por minuto
-
Reactor E-10
For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute
-
Reactor E-20 y E-30
Para aplicaciones de aislamiento de espuma de suministro medio a elevado - aplica hasta 30 lb (13,...