1K Ultra-Lite Válvula de dispensación de precisión
Para un dispensado preciso del cordón de sellantes y adhesivos
Las Válvulas 1K Ultra-Lite son de primera calidad, livianas y compactas, diseñadas para un servicio duradero.
- Disponible en versión manual y automática
- Prensaestopas lubricados para extender la vida de la junta
- Aguja y asiento de uso intensivo
- Elimina el goteo tipo cabeza de serpiente y de material
- Recorrido delantero ajustable para reducir el flujo del material
Manuales
Literatura
| 1K Ultra-Lite | |
| Maximum Fluid Pressure |
4000 psi
28 MPa, 276 bar
|
| Maximum Cylinder Air Pressure |
120 psi
0.84 MPa, 8.4 bar
|
| Air inlets (open and close ports) |
1/8 npt(f)
1/8 npt(f)
|
| Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
| Fluid Outlet |
1/4 npt(f) and 3/4–16 unf(m)
1/4 npt(f) and 3/4–16 unf(m)
|
| Fluid Viscosity Range |
20 cps to 1 million cps
20 cps to 1 million cps
|
| Snuffer Action Fluid Section |
Isolation chamber with zerk fittings
Isolation chamber with zerk fittings
|
| Divorced Air Cylinder |
Piston cylinder, EP o-rings
Piston cylinder, EP o-rings
|
| Weight | |
| Aluminum Valve |
1.43 lb
0.65 kg
|
| Stainless Steel Valve |
2.07 lb
0.94 kg
|
| Handle Kit |
0.77 lb
0.35 kg
|
| Wetted Parts | |
| Aluminum Valve |
aluminum, 303 stainless steel, 17–4 PH stainless steel, C2 carbide, hard chrome, ethylene propylene, Parker Polymite, PTFE
aluminum, 303 stainless steel, 17–4 PH stainless steel, C2 carbide, hard chrome, ethylene propylene, Parker Polymite, PTFE
|
| Stainless Steel Valve |
303 stainless steel, 17–4 PH stainless steel, C2 carbide, hard chrome, ethylene propylene, Parker Polymite, PTFE
303 stainless steel, 17–4 PH stainless steel, C2 carbide, hard chrome, ethylene propylene, Parker Polymite, PTFE
|
| Severe-duty Components | |
| Shaft |
Hard chrome over 303 stainless steel
Hard chrome over 303 stainless steel
|
| Snuffer Needle |
Hardened 440–C stainless steel
Hardened 440–C stainless steel
|
| Seat |
Reversible, solid C2 carbide inserts
Reversible, solid C2 carbide inserts
|
| Shaft Seal, standard |
High density Parker Polymite
High density Parker Polymite
|
| Shaft Seal, optional |
PTFE
PTFE
|
| Loctite is a registered trademark of the Loctite Corporation | |
