Graco Inc.

Pro Xp60 AA Electrostatic Spray Guns  Electrostatic Air-Assist Guns Deliver Expert Performance

Pro Xp60 kV air-assist gun is the smallest and lightest electrostatic air-assist gun on the market – delivering a consistent, high quality finish every time you spray

ForhandlereBe om informasjon
Del |
Pro Xp60 AA, 60 kV Air-Assist, Waterborne

Our improved tip line delivers a high quality finish for a variety of applications. Plus, the pre-orifice tips atomize paints for fine finish applications. Pro Xp60 AA gun line includes Standard, Smart and Waterborne models.

  • High quality spray performance with a one-piece aircap and variety of spray tips
  • Transfer efficiency is improved over conventional air-assist guns
  • Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Made in the USA
  • The smallest profile gun with internal power supply on the market – 1 inch (2.5 cm) shorter and 4 oz (110 g) lighter
  • Fan adjust pattern control reduces overspray by changing the fan pattern width according to the size of the part – improving quality and saving you money
  • Rugged, dependable design supported by a three year warranty
  • Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

Håndbøker

Litteratur

Vis verdier med metriske enheter. Vis verdier med amerikanske enheter.

Electrostatic Air-Assisted Spray Guns
Maximum Working Fluid Pressure
3000 psi
21 MPa, 210 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Paint Resistivity Range
3 megohm/cm to infinity
3 megohm/cm to infinity
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
1/4–18 npsm(m)
1/4–18 npsm(m)
Output Voltage
Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
Pro Xp60 Models: 60 kV. Pro Xp85 Models: 85 kV
Maximum Current Draw
125 microamperes
125 microamperes
Sound Power (measured per ISO Standard 9216)
at 40 psi: 88.9 dB(A) at 100 psi: 99.7 dB(A)
at 0.28 MPa, 2.8 bar: 88.9 dB(A) at 0.7 MPa, 7.0 bar: 99.7 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 86.0 dB(A) at 100 psi: 95.0 dB(A)
at 0.28 MPa, 2.8 bar: 86.0 dB(A) at 0.7 MPa, 7.0 bar: 95.0 dB(A)
Wetted Parts
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene
PEEK, UHMWPE, FEP, PTFE, acetal, nylon, polyethylene