Graco Inc.

ProControl 1KS  Sistema de Controle Eletrônico de Fluxo de Componente Único

Sistema de controle de fluxo em circuito fechado elimina o excesso de material aplicado na peça para aumentar a economia de material

Onde comprarSolicitar informações
Share |

ProControl is a closed loop flow control system that eliminates excess material applied to the part for increased material savings. It ensures consistent flow rates and allows for better process control. 

Use with Graco's ProMix 2KS plural component proportioner for integrated color change in your automatic applications.

ProControl 1KS Fluid Manifold

Single Component Flow Control


  • Fast step change less than 200 msec for better process control
  • Maintain flow rates from 20 to 1,200 cc/min

Integrated Flushing

  • Air/solvent chop minimizes material waste


Optional Color Change Modules

  • Easily handles up to 30 colors


Flexible Installation

  • Intrinsically safe components
  • Compatible with solvent and waterborne materials
  • Convenient interfaces for PLC controls

Ver valores em unidades métricas. Ver valores em unidades dos Estados Unidos.

ProControl 1KS
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Fluids handled
one component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
4000 psi
275.8 bar, 27.58 MPa
Low pressure color change
300 psi
20.6 bar, 2.07 MPa
Coriolis Meter
2300 psi
158.6 bar, 15.86 MPa
Flow control
190 psi
13.1 bar, 1.31 MPa
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
1/4 npt(f)
Fluid Outlet Size (static mixer)
1/4 npt(f)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA