Graco Inc.

Informer  In-line Fluid Monitoring Package

Monitor fluid rates, reduce material waste & improve spray performance. Ideal for solvent tracking & other finishing materials.

De unde se pot achiziţionaSolicitare informaţii
Partajare |
Graco Informer

The Informer is a great tool for reducing paint waste, collecting data and improving the finishing process. This easy-to-use fluid monitoring package accurately measures flow rate and the amount of material that passes through a fluid line. An ideal solution for solvent tracking!

  • Intrinsically safe AC mounting for hazardous areas or standard AC (100-240 VAC) for non-hazardous areas
  • Protect equipment from runaway using maintenance reminders including tank filling
  • Easily collect material use data for environmental compliance reports
  • Monitor flow rates to identify worn tips on your spray guns or calibration issues - reducing paint waste and cost
  • Easy-to-read display is backlit for low light conditions
Vizualizare valori în sistem metric. Vizualizare valori în unităţi de măsură S.U.A..

Informer
Power In Requirements
Voltage
90–264 VAC
90–264 VAC
Frequency
50-60 Hz
50-60 Hz
Phase
1
1
Amps
1.25A maximum
1.25A maximum
Power Out Requirements:
Power Supply 16V680
15 VDC, 1.2 A maximum
15 VDC, 1.2 A maximum
Power Supply 16M167
15 VDC, 160 mA maximum
15 VDC, 160 mA maximum
Maximum Fluid Working Pressure
289813 G3000 Meter
4000 psi
28 MPa, 276 bar
Environmental
Operating Temperature
32°-122°F
0°-50°C
Storage Temperature
–22°-140°F
–30°-60°C
Humidity
0 to 95 percent, non-condensing
0 to 95 percent, non-condensing
Display housing is solvent resistant.
Wetted Parts
See the G3000 meter manual (308778) or Coriolis meter manual (313599).
Weight
Informer
1 lb
0.45 kg
Mounting Bracket
1 lb
0.45 kg
Power Supply 16M167
9 lb
4.1 kg
G3000 Meter
6
2.7 kg