SDI15 Meter In-Line Electronic Oil Meter
For accurately recording fluid dispense
Ideal for accurate high pressure oil dispensing and metering in the most rugged environments, the SDI15 inline electronic meter makes recording and tracking fluid simple. Get a Graco SDI15 and account for your fluid dispenses to reduce inventory loss and increase profits.
- Tracks totals in two modes-reset total for a periodic dispense history and non-reset total for the meter's total dispense history
- Durable design ideal for rugged, indoor use
- Easy-to-use meter dispenses pints, quarts, liters or gallons
- Energy efficient and powered by two easy-to-replace alkaline batteries
- Easily calibrated for a variety of fluid viscosities
Manuale
Documentaţie
SDI15 Inline Electronic Meter, Model 247453 | |
Flow Range |
0.5 to 15 gpm
1.9 to 57 lpm
|
Maximum working pressure |
1500 psi
10.3 MPa, 103
|
Minimum working pressure |
5 psi
34kPa, 0.3 bar
|
Weight |
1.8 lb
0.82 kg
|
◆ Units of measurement |
Factory-set in quarts
Factory-set in quarts
|
† Accuracy |
+/- 0.5 percent
+/- 0.5 percent
|
‡ Repeatability |
+/- 0.15 percent
+/- 0.15 percent
|
❖ Inlet and outlet |
1/2 npt
1/2 npt
|
Operating temperature range |
-4°F to 122°F
-20°C to 50°C
|
Storage temperature range |
-13°F to 122°F
-25°C to 50°C
|
Wetted parts |
Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
|
∗ Batteries |
2 AA alkaline
2 AA alkaline
|
Expected battery life |
6 to 12 months
6 to 12 months
|
◆ Display shows quantity in 0.01 increments up to 999.99 gallons, quarts, pints or liters. Totals in gallons or liters up to 99,999 units. | |
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil, and 1 gallon dispensed. May require calibration; out-of-box accuracy is +/- 1.25 percent | |
‡ At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil, and 1 gallon dispensed | |
❖ Meter can be installed with flow in either direction | |
∗ Recommended batteries: Duracell®, Energizer®, Eveready®, En22 ®. Duracell®is a registered trademark of Duracell Inc. Eveready® and Energizer® are registered trademarks of Eveready Battery Co., Inc. | |
SDI15 Inline Electronic Meter, Model 24G738 | |
Flow Range |
0.5 to 15 gpm
1.9 to 57 lpm)
|
Maximum working pressure |
1500 psi
10.3 MPa, 103
|
Minimum working pressure |
5 psi
34 MPa, 0.3 bar
|
Weight |
1.8 lb
0.82 kg
|
◆ Units of measurement |
Factory-set in quarts
Factory-set in quarts
|
† Accuracy |
+/- 2.5% after calibration
+/- 2.5% after calibration
|
‡ Repeatability |
+/- 0.15%
+/- 0.15%
|
❖ Inlet and outlet |
1/2 bspp
1/2 bspp
|
Operating temperature range |
-4°F to 122°F
-25°C to 50°C
|
Storage temperature range |
-13°F to 122°F
-25°C to 50°C
|
Wetted parts |
Stainless steel, PBT (polybutylene terephthalate) nickel, fluoroelastomer
Stainless steel, PBT (polybutylene terephthalate) nickel, fluoroelastomer
|
∗ Batteries |
2 AA Alkaline
2 AA Alkaline
|
Expected battery life |
6 to 12 months
6 to 12 months
|
◆ Display shows quantity in 0.01 increments up to 999.99 gallons, quarts, pints or liters. Totals in gallons or liters up to 99,999 units. | |
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil, and 1 gallon dispensed. May require calibration; out-of-box accuracy is +/- 1.25 percent | |
‡ At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil, and 1 gallon dispensed | |
❖ Meter can be installed with flow in either direction | |
∗ Recommended batteries: Duracell®, Energizer®, Eveready®, En22 ®. Duracell®is a registered trademark of Duracell Inc. Eveready® and Energizer® are registered trademarks of Eveready Battery Co., Inc. |