Graco Inc.

Viscount II 1200 and 3100  Hydraulic Piston Pumps

Hydraulic piston pump ideal for letterpress and lithographic inks

De unde se pot achiziţionaSolicitare informaţii
Partajare |

When paired with any of Graco's priming piston pumps, the Viscount II hydraulic air motor offers exceptional cost savings by operating on 20% of the energy used by a pneumatic motor. The Viscount II, Graco's patented hydraulic motor, replaces the King, Bulldog or Senator motors with the 800 or 2100 pump.

  • Clean, quiet and efficient hydraulic power
  • Extremely durable hydraulic pump with long-life packing design
  • Highly efficient Viscount hydraulic motor reduces energy costs
  • Stainless steel wetted parts with neoprene packings

Vizualizare valori în sistem metric. Vizualizare valori în unităţi de măsură S.U.A..

Viscount II Hydraulic Motor
Maximum hydraulic fluid input pressure: Models 217022, 217338, 235345.
1500 psi
103 bar, 10 MPa
Maximum hydraulic fluid input pressure: Model 262818
1800 psi
124 bar, 12 MPa
Maximum hydraulic fluid input pressure: Model 24W139
1900 psi
13.1 MPa, 131 bar
Maximum hydraulic fluid flow
12 gpm
45.6 lpm
Hydraulic fluid consumption
1 gal per 5 cycles
3.8 l per 5 cycles
Effective piston area
4.9 sq in
31.6 sq cm
Piston rod diameter
2.5 in
64 mm
Stroke length
4.69 in
119.1 mm
Thrust at 1500 psi (10 MPa, 103 bar)
7300 psi
32 472 N
Weight
approximately 96 lb
43.5 kg
Loctite® is a registered trademark of the Loctite Corp.

Check-Mate 2100 Pumps
Ratio
24:1 (Quiet King Air Motor)
24:1 (Quiet King Air Motor)
Maximum fluid working pressure
2400 psi
16.6 MPa, 166 bar
Maximum air input pressure
100 psi
0.7 MPa, 7 bar
Pump cycles per 3.8 liters (1 gal.)
8
8
Recommended pump speed for continuous operation
50 cycles per min
50 cycles per min
Maximum flow
23.75 liters/min (7.5 gpm) at 50 cycles/min
23.75 liters/min (7.5 gpm) at 50 cycles/min
Air motor piston effective area
78.5 in.²
506 cm²
Stroke length
4.75 in.
120 mm
Displacement pump effective area
3.255 in.²
21 cm²
Maximum pump operating temperature
150°F
65.5°C
Air inlet size
3/4 npsm(f)
3/4 npsm(f)
Fluid outlet size
1–1/2” npt(m)
1–1/2” npt(m)
Weight
approx. 160 lb
approx. 73 kg
Displacement Pump Weight
approx. 37 kg
approx. 81 lb
Wetted parts
Carbon Steel; Chrome, Zinc, and Electroless Nickel Plating; 304 and 17–4 PH Grades of Stainless Steel; E52100 Alloy Steel; Ductile Iron; Acetal; PTFE; Ultra-High Molecular Weight Polyethylene
Carbon Steel; Chrome, Zinc, and Electroless Nickel Plating; 304 and 17–4 PH Grades of Stainless Steel; E52100 Alloy Steel; Ductile Iron; Acetal; PTFE; Ultra-High Molecular Weight Polyethylene