Graco Inc.

King Electric Airless Sprayer  The electric solution for spraying protective coatings

مكان الشراءطلب معلومات
مشاركة |
Application of protective coatings

Meet the new King

The Graco airless sprayer product line has been the industry's preferred brand for over 60 years. The new King electric airless sprayer combines benefit of the traditional pneumatic airless sprayer like the robust ATEX design, simple maintenance and strength with the benefits of an electric unit like energy cost savings, eliminating icing problems and noise reduction. 

The new King operates on a more reliable, convenient and available electric power source, which rectifies inefficiencies associated with compressors.

Electric power

  • No need for an air compressor - Avoid inefficiencies associated with compressors.
  • Environmental friendly - Contribute to a cleaner energy future.
  • Consistent Quality - Less pulsation to always have a good pattern.

ATEX approved

  • ATEX, IECEX, and Class 1, DIV. 1 Approvals - Allowed to work in any location where generating a spark is of concern.
  • Safe operation - Get the job done safely: approved for hazardous locations.
  • Spray solvent-based coatings - Protect yourself against the risks from hazardous solvents.

User comfort

  • Plug in & Spray - Runs on widely available 240V/16A or 110V/25A power.
  • Quite electric motor - When compared to an air motor, the King sprayer is up to five times more quiet.
  • No more icing - By eliminating the need for an air motor, it is possible to avoid all icing problems.

Cost savings

  • Improved efficiency - Improved efficiency and an overall lower cost of ownership.
  • Energy savings - Saves up to 80% of energy costs when compared to an air operated sprayer.*
  • Stay productive - Stay productive by using the most reliable power source available – electricity!
*Study completed on pump pressure of 241 bar (3500 psi) for 20 hours/week; spraying 1226 L (324 gal) of 73% volume solids epoxy with XHD519 tip

Why choose the King Electric Airless Sprayer?

Choose the model that's right for you

  E60 King Electric Sprayer E50 King Electric Sprayer
Maximum Working Pressure 414 Bar
(6000 psi, 41.4 MPa)		 310 Bar
(4500 psi, 31.0 MPa)
Supported Tip Size* 0.53 mm (.021 in) @ 345 bar (5000 psi, 34.5 MPa) Spray pressure 0.58 mm (.023 in) @ 276 bar (4000 psi, 27.6 MPa) Spray pressure
Overall Dimensions
(W x H x D)		 70 x 127 x 74
(27.5 x 50.0 x 29.0 in)		 70 x 127 x 74
(27.5 x 50.0 x 29.0 in)
Operating Temperature Range 5˚C to 50˚C
(23˚F to 120˚F)		 5˚C to 50˚C
(23˚F to 120˚F)
Power Input 15A @ 200-240V, 50/60 Hz, single phase;
25A @ 100-120V, 50/60 Hz, single phase		 15A @ 200-240V, 50/60 Hz, single phase;
25A @ 100-120V, 50/60 Hz, single phase
Sound Pressure 70 dB (A) 70 dB (A)
*Actual supported tip size may be larger or smaller depending on: actual input voltage, hose length, paint type, paint thinning, and paint temperature.

Get More Information

Learn more about King
protective coatings sprayers

تمثل خصوصيتك أهمية قصوى بالنسبة لـ Graco. لن نقوم ببيع المعلومات الخاصة بك للشركات الأخرى. إلا أنه من أجل أن نلبي احتياجاتك بأفضل صورة، فإن المعلومات الخاصة بك قد يتم مشاركتها مع شركاء التوزيع لدى Graco. للاطلاع على التفاصيل، يُرجى استعراض سياسة الخصوصية.