Graco Inc.

SD Series Preset Electronic Meters  Preset Fluid Meters and Valves

Premium quality and performance meters with an ergonomic design that are compatible with the Pulse FC Fluid Control System

مكان الشراءطلب معلومات

Graco's SD series meters are ideal for metered oil and dispense for standard and heavy-duty applications, including car/truck dealerships, fleets, mining, off-road, public works garages, construction and higher volume in-plant applications.

Compatible with 200l roll-around / mobile drums

Compatible with 200l roll-around / mobile drums

 

Configure SD Preset meters to Pulse FC Fluid Control

Configure SD Preset meters to Pulse FC Fluid Control

 



Request more information

تمثل خصوصيتك أهمية قصوى بالنسبة لـ Graco. لن نقوم ببيع المعلومات الخاصة بك للشركات الأخرى. إلا أنه من أجل أن نلبي احتياجاتك بأفضل صورة، فإن المعلومات الخاصة بك قد يتم مشاركتها مع شركاء التوزيع لدى Graco. للاطلاع على التفاصيل، يُرجى استعراض سياسة الخصوصية.

Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

 

  • Upgradeable—SD Preset meters are compatible with Pulse FC Fluid Control System
  • Large, Intuitive Display—high-contrast display for low and bright light conditions
  • Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
  • Ergonomic—four-finger trigger and easy-to-use button pad reduce worker fatigue
  • Reliable—time-tested Graco engineering
  • Durable—Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
  • Long battery life—uses 4 AA easy-to-replace batteries

 

SDM5 and SDM15 (Manual);SDP5 and SDP15 (Preset) Meters
Flow range (Tested in 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity)
0.26 to 14 gpm
1 to 53 lpm
Maximum Working Pressure
1500 psi
10 MPa, 103.4 bar
Maximum Working Pressure (50:50 antifreeze/water mix)
900 psi
6.2 MPa, 62 bar
Units of measure
Pints, quarts, gallons, liters (factory set to quarts)
Pints, quarts, gallons, liters (factory set to quarts)
Weight
5 pounds
2.26 kg
Inlet
1/2–14 npt or 3/4–14 npt, 1/2–14 BSPP or 3/4–14 BSPP, 1/2–14 BSPT or 3/4–14 BSPT
1/2–14 npt or 3/4–14 npt, 1/2–14 BSPP or 3/4–14 BSPP, 1/2–14 BSPT or 3/4–14 BSPT
Outlet
3/4–16 straight thread o-ring boss
3/4–16 straight thread o-ring boss
Operating Temperature Range
4° F to 158° F
-16° C to 70° C
Storage Temperature Range
-40° F to 158° F
-40° C to 70° C
Battery (Battery required to meet life expectance: Energizer® Alkaline E91)
4AA alkaline or lithium batteries
4AA alkaline or lithium batteries
Expected battery life in typical shop environment
1 year
1 year
Wetted Parts
Aluminum, stainless steel, PBT/PC, zinc, nitrile rubber, CS
Aluminum, stainless steel, PBT/PC, zinc, nitrile rubber, CS
Fluid Compatibility
Antifreeze, gear oil, crankcase oil, ATF
Antifreeze, gear oil, crankcase oil, ATF
Meter Pressure Loss Accuracy
80 psi @ 10 gpm +/- 0.5%
80 psi @ 10 gpm +/- 0.5%
Dimensions
Length
13 in (without extension)
33 cm (without extension)
Width
3.75 in (without extension)
9.5 cm (without extension)
Height
5.75 in (without extension)
14.6 cm (without extension)
Units of Measure
Factory Set in Quarts, maximum totalizer amount = 999,999 gal or l, maximum recorded dispensed volume = 999.99 units, maximum preset volume (Preset only) = 999.9 units
Factory Set in Quarts, maximum totalizer amount = 999,999 gal or l, maximum recorded dispensed volume = 999.99 units, maximum preset volume (Preset only) = 999.9 units