Warm Melt Supply Systems Bulk Melt Unloader
Bulk unloader for warm melt materials and temperature conditioning applications
Designed specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. Ideal for temperature conditioning applications. An excellent alternative to water-jacketed solutions.
- Bridges the gap between hot melt and ambient supply systems
- Modular approach provides easy snap-on installation and eliminates complex point-to-point wiring
- Intuitive, easy-to-use interface
- Configurable to fit your unique application and material
أدلة المستخدم
الأدب
Warm Melt Supply Systems | |
Maximum Air Input Pressure | |
D60 |
150 psi
10 bar, 1 MPa
|
D200 |
150 psi
10 bar, 1 MPa
|
D200s |
125 psi
9 bar, 0.9 MPa
|
Platen Wetted Parts (By Platen Code and Part Number) | |
F: 257729, 5 gal (20 l) |
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
Stainless steel, polyurethane, PTFE coated nitrile, polyethylene, nitrile, PTFE, 303 sst, 304 sst, 316 sst, 17-4PH sst
|
L: 257734, 8 gal (30 l) | |
U: 257738, 16 gal (60 l) | |
H: 257731, 5 gal (20 l) |
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
Electroless nickel, aramind reinforced elastomer, rubber-based PSA, polyurethane, polyethylene, nitrile, zinc-plated carbon steel, buna, 1018 carbon steel, 304 sst, 316 sst, 17-4PH sst
|
R: 257736, 8 gal (30 l) | |
Y: 257741, 16 gal (60 l) | |
8: 255662, 55 gal (200 l) |
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
PTFE, EPDM, PTFE coated aluminum, zinc-plated carbon steel, 316 sst
|
9: 255663, 55 gal (200 L) |
EPDM, aluminum, zinc-plated carbon steel, 316 sst
EPDM, aluminum, zinc-plated carbon steel, 316 sst
|
Displacement Pump |
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
See Check-Mate Displacement Pump and Pump Packages for wetted parts, weight, flow rate, and maximum fluid and air working pressure
|
Maximum Operating Temperature (Supply System) |
158°F
70°C
|
Sound Data |
See NXT Air Motor
See NXT Air Motor
|
External Power Supply Requirements | |
AC Power Units |
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current
220-250 Vac, 50/60 Hz, single phase, 57 amps full load current
|
-
نقل المواد عالية اللزوجة
أدوات تفريغ الأسطوانات والحاويات لمواد بالكاد قابلة للتدفق
-
نظام الإمداد بكميات ضخمة
تفريغ المنتجات ذات درجات اللزوجة المتوسطة إلى العالية من حاويات أصلية 55 جالونًا (208 لترات) ...
-
نقل المواد متوسطة اللزوجة
مجموعة كبيرة من المضخات خاصة بالمواد القابلة للتدفق إلى حد ما والمخصصة للاستخدامات الصحية وا...
-
Prepreg Supply
Equipment to deliver mixed resin into fibers
-
Resin Batch Blending
Equipment for proportioning resins and hot melt resin dispensing