Graco Inc.

M2K Proportioners  Fixed Ratio, Entry Level Mechanical Proportioner

Ideal for lower volume two component epoxy, polyurethane and polyester materials

Kde kúpiťPožiadať o informácie
Zdieľať |

Graco’s new M2K proportioning system eliminates hand mixing in an easy to use, compact design. This fixed ratio machine keeps your mix ratio consistent, minimizing flush time, material waste and clean up associated with hand mixing. Plus there’s a version specifically designed to manage split batch polyester materials.

  • Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
  • Compact size makes it faster and easier to flush, saving you time and disposal costs
  • Ideal for lower volume two component epoxy, polyurethane and polyester materials
  • Proven reliability on key system components, including our Merkur air motor
  • Choose from air spray, air-assist and airless spray technologies

Zobraziť hodnoty v metrických jednotkách. Zobraziť hodnoty v amerických jednotkách.

M2K Spray Packages
U.S.
Metric
Maximum fluid working pressure
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum flow rate
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum pump air pressure
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum spray gun pressure
See your gun manual for spray gun pressures.
See your gun manual for spray gun pressures.
Pump air consumption (See gun manual for additional air consumption)
Refer to Performance Charts, instruction manual
Refer to Performance Charts, instruction manual
Maximum free-flow delivery <b >*NOTE: M2K proportioners are rated to 20 cycles per minute related flowrate to prevent cavitation and ensure complete pump loading, necessary to maintain ratio accuracy.
Recommended cycle rate for continuous duty
20 cycles per minute
20 cycles per minute
Maximum viscosity
10,000 cps
10,000 cps
Ambient air temperature range
35°–120°F
2°–49°C
Maximum fluid temperature
160°F
71°C
Fluid flow per cycle
Refer to Technical Data Matrix, in instruction manual
Refer to Technical Data Matrix, in instruction manual
Noise (dBa)
Maximum sound pressure
See Technical Data in air motor manual 312796.
See Technical Data in air motor manual 312796.
Inlet/Outlet Sizes
Air inlet size
1/4 in. npt(f)
1/4 in. npt(f)
Materials of Construction**
Wetted materials on all models
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE, PEEK Spray gun: See Manual 312414 (Air Spray guns). 3A0149 (AA guns), or Manual 312145 (XTR guns). Fluid hoses: nylon 303/304 SST Suction assembly: stainless steel, nylon Relief valve, 304 SST, graphite-filled PTFE, tungsten carbide with nickel binder Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE, PEEK Spray gun: See Manual 312414 (Air Spray guns). 3A0149 (AA guns), or Manual 312145 (XTR guns). Fluid hoses: nylon 303/304 SST Suction assembly: stainless steel, nylon Relief valve, 304 SST, graphite-filled PTFE, tungsten carbide with nickel binder Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
Weight:
All models
Refer to Technical Data Matrix, in instruction manual
Refer to Technical Data Matrix, in instruction manual