Heated Fluid Regulator
Provides precision dispense for Therm-O-Flow Systems
Maintains fluid pressure for consistent bead control of sealants and viscous materials
- Provides consistent bead width without pump cross-over effects
- Precise output and superior material delivery rates
- Dual element heater provides controlled temperature – no material charring or plugging
- For hot-melt adhesives and non-water-based temperature conditioned sealants and adhesives
- Precision pressure control from 200 to 3000 psi
Príručky
Dokumenty
- 339052EN, Graco Heated Fluid Regulator flyer (Len anglicky)
Heatd Fluid Regulator | |
Maximum Fluid Working Pressure |
3000 psi
21 MPa, 210 bar
|
Regulated Fluid Pressure Range |
200-3000 psi
1.4-21 MPa, 14-210 bar
|
Maximum Flow Rate |
1.2 gpm with 7000 centipoise fluid at 350°F
4.56 liter/min with 7000 centipoise fluid at 176°C
|
Maximum Fluid Temperature |
400°F
204°C
|
Voltage |
230/240 Vac
230/240 Vac
|
Wattage |
220 W
220 W
|
Maximum Current |
1 A
1 A
|
Resistance temperature detector (platinum RTD; 0.00385 ohm/ohm/°C) |
108.2 ohms @ 70°F
108.2 ohms @ 70°F
|
Heater resistance |
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
|
Fluid Inlet |
3/8 npt(f)
3/8 npt(f)
|
Fluid Outlet |
3/8 npt(f)
3/8 npt(f)
|
Optional Fluid Outlet |
1/4 npt(f)
1/4 npt(f)
|
Weigh |
6.5 lb
2.9 kg
|
Wetted Parts |
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel
|