EcoQuip 2 - Skid
With Graco's EcoQuip 2 Vapor Abrasive blast equipment, remove everything from paint and coatings to corrosion and residue without the wet, slurry mess you get from traditional wet abrasive blasters.
INCREASE PRODUCTION
- Get the job done quickly and efficiently with a pot pressure rating up to 200 psi (14 bar)
- 5 simple steps for quick start up
- Simple, user-friendly MediaTrak screen helps you set media flow to optimal levels
- Every unit is tested on state-of-the-art test bench before it ships
Large, Single Control Panel
Simple, intuitive design allows for easy control
Dual Line Control Logic
Allows for consistent abrasive flow for dual blasting
Air Inlet Filter
Prevents dirt and debris from entering air circuit
Unrestricted Fill Opening
Allows for 2x faster loading than previous models
120 gal Water Tank
Large enough for 1 1/2 refills of pressure pot
12 cubic ft Pressure Pot
Larger pot allows for long blast time with two nozzles
Browse EcoQuip 2 - Skid
Competitive Comparison Chart
 |
 |
 |
 |
|
|---|---|---|---|---|
| EcoQuip 2 EQs | Greener Blast GBT 760 | Dustless Blasting DB3000 | CLEARBLAST 650MAX | |
| Run Time (approx) | 4 or more hours | N/A | 4 or more hours | 4 or more hours |
| Weight (dry) | 1,070 lbs | 1,030 lbs | 1,200 lbs | 775 lbs |
| Dimensions | 60"L x 46"W x 56"H | 78"L x 31"W x 55"H | 46"L x 48"W x 98"H | 54.5"L x 54.5"W x 40.5"H |
| Pot Coating | A-coat / Powder | Galvanized / Powder | N/A | Powder |
| Pot Capacity | 6.5 cu. ft. | 7.6 cu. ft. | 30 cu. ft. | N/A |
| Air Requirements | 185 CFM | 375 CFM | 375 CFM | 185 CFM |
| Max Blast Pressure | 175 psi | 120 psi | 150 psi | 130 psi |
| Pressure Pot Rating | 200 psi | 150 psi | 150 psi | 150 psi |
| ATEX Certification | Optional | No | No | No |
| Fixed Pot Pressure Setting | Yes | No | N/A | No |
| Abrasive Consumption Display | Yes | No | No | No |
| Source | graco.com | greenerblast.com | dustlessblasting.com | clearblast.com |
