Husky 1050e

Husky 1050 Polypropylene Pump, 240V Comp, BLDC Motor, Ctr Flange, Al Ctr Sct, Polypropylene Seats, PTFE Balls & PTFE Ovrmld Diaph

650146

Husky_1050e_Poly_Poly

Husky 1050e

Husky 1050 Polypropylene Pump, 240V Comp, BLDC Motor, Ctr Flange, Al Ctr Sct, Polypropylene Seats, PTFE Balls & PTFE Ovrmld Diaph

650146

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Questions About this Product?

If you’re not finding the information you need, ask one of our experts.

Ask an Expert

Features

Product Brochure

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

  • Durable Pump Technology

    • Handles slurries and abrasives all without damage to the pump
    • Gentle on shear sensitive material
  • Diaphragm Pump

    • Runs dry
    • No rotating or moving fluid seals
    • Self-priming
  • Electric Drive

    • Reduce energy consumption and operating costs
    • Increase pump control
    • Accurately meter fluid
  • Fluid Section

    • Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
  • Patent Pending Air Charged Drive

    • Increase diaphragm life without compromising your fluid
    • Ability to reduce pulsation on fluid outlet
    • Stalls under pressure without additional switches and controls
  • Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

Specifications

Technical Specifications

Convert to Metric
Air Inlet Size (in) 3/8
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Center Section Material Aluminum
Compatible Material Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solventborne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
Connection Type Center Flange ANSI/DIN
Diaphragm Material PTFE/EPDM Overmold
Fluid Inlet Size (in) 1
Fluid Outlet Size (in) 1
Fluid Section Material Polypropylene
Manifold Configuration Center Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Pressure (MPa) 0.55
Maximum Air Pressure (psi) 80
Maximum Amperage (A) 5.2
Maximum Cycle Rate (CPM) 280
Maximum Flow Rate (GPM) 42
Maximum Fluid Pressure (MPa) 0.48
Maximum Fluid Pressure (psi) 70
Maximum Motor Speed (RPM) 3600
Maximum Operating Temperature (°F) 104
Maximum Solid Size (in) 0.125
Maximum Storage Temperature (°F) 104
Minimum Operating Temperature (°F) 32
Minimum Storage Temperature (°F) 32
Motor Type Brushless DC
Power Rating (HP) 2.2
Power Source Electric
Seat Material Polypropylene
Type Electric Diaphragm Pump
Voltage (V ac) 320
Weight (lb) 87.5
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Center Section Material Aluminum
Compatible Material Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solventborne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
Connection Type Center Flange ANSI/DIN
Diaphragm Material PTFE/EPDM Overmold
Fluid Inlet Size (cm) 2.54
Fluid Inlet Size (mm) 25.4
Fluid Outlet Size (cm) 2.54
Fluid Outlet Size (mm) 25.4
Fluid Section Material Polypropylene
Manifold Configuration Center Port
Manifold O-Ring Material PTFE
Material Polypropylene
Maximum Air Pressure (MPa) 0.55
Maximum Air Pressure (bar) 5.5
Maximum Air Pressure (kPa) 550
Maximum Amperage (A) 5.2
Maximum Cycle Rate (CPM) 280
Maximum Flow Rate (L/min) 159
Maximum Fluid Pressure (MPa) 0.48
Maximum Fluid Pressure (bar) 4.8
Maximum Fluid Pressure (kPa) 480
Maximum Motor Speed (RPM) 3600
Maximum Operating Temperature (°C) 40
Maximum Solid Size (cm) 0.3175
Maximum Solid Size (mm) 3.175
Maximum Storage Temperature (°C) 40
Minimum Operating Temperature (°C) 0
Minimum Storage Temperature (°C) 0
Motor Type Brushless DC
Power Rating (HP) 2.2
Power Source Electric
Seat Material Polypropylene
Type Electric Diaphragm Pump
Voltage (V ac) 320

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7:30 a.m.–5 p.m. Central Time

Email Support

Email Support

Find a Distributor

Find a Distributor

For local sales and service support

Reviews

Graco