Cart
New
Husky 3250
Husky 3250, 3" BSPT, AL Pneumatic Diaphragm Pump, PP Center, GE Seat, GE Ball, CR Diaphragm
Part Number: 660079
Husky 3250
Husky 3250, 3" BSPT, AL Pneumatic Diaphragm Pump, PP Center, GE Seat, GE Ball, CR Diaphragm
Part Number: 660079
The Husky 3250 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The Husky 3250 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
The 3250 is a 3-inch pump for high-flow transfer up to 250 gpm, including high viscosity materials.
- Four bolt joint design provides even sealing pressure for leak-free operation
- Stall-resistant modular air valve for efficient operation and quick replacement
- Pilot valve is externally serviceable and spring loaded for fast change over
- The Graco air valve consumes up to 30% less energy and is externally serviceable in about 5 minutes
- Air valve requires no lubrication, no oilers needed
Specifications & Documents
Technical Specifications
Convert to Metric| Air Exhaust Port Size (in) | 1 |
|---|---|
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 3/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | G.E.T. (Graco Engineered Thermoplastic) |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer |
| Connection Type | BSPT |
| Construction | Aluminum, G.E.T. (Graco Engineered Thermoplastic), Polychloroprene, PTFE |
| Diaphragm Material | Polychloroprene |
| Fluid Inlet Size (in) | 3 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | BSPT |
| Fluid Outlet Size (in) | 3 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | BSPT |
| Fluid Section Material | Aluminum |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Maximum Air Consumption (SCFM) | 280 |
| Maximum Air Pressure (MPa) | 0.86 |
| Maximum Air Pressure (psi) | 125 |
| Maximum Cycle Rate (CPM) | 112 |
| Maximum Flow Rate (GPM) | 245 |
| Maximum Fluid Pressure (MPa) | 0.86 |
| Maximum Fluid Pressure (psi) | 125 |
| Maximum Operating Temperature (°F) | 176 |
| Maximum Solid Size (in) | 0.375 |
| Maximum Working Pressure (psi) | 125 |
| Minimum Operating Temperature (°F) | 14 |
| Model | Husky |
| Overall Height (in) | 29.1 |
| Power Source | Air |
| Pump Ratio | 1:1 |
| Seat Material | G.E.T. (Graco Engineered Thermoplastic) |
| Series | 3250 |
| Standards Met | CE |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 95 |
| Air Exhaust Port Size (in) | 1 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 3/4 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | G.E.T. (Graco Engineered Thermoplastic) |
| Center Section Material | Polypropylene |
| Compatible Material | Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer |
| Connection Type | BSPT |
| Construction | Aluminum, G.E.T. (Graco Engineered Thermoplastic), Polychloroprene, PTFE |
| Diaphragm Material | Polychloroprene |
| Fluid Inlet Size (cm) | 7.6 |
| Fluid Inlet Size (in) | 3 |
| Fluid Inlet Size (mm) | 76 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | BSPT |
| Fluid Outlet Size (cm) | 7.6 |
| Fluid Outlet Size (in) | 3 |
| Fluid Outlet Size (mm) | 76 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | BSPT |
| Fluid Section Material | Aluminum |
| Manifold Configuration | Center Port |
| Manifold O-Ring Material | PTFE |
| Maximum Air Pressure (MPa) | 0.86 |
| Maximum Air Pressure (bar) | 8.6 |
| Maximum Air Pressure (kPa) | 861.8 |
| Maximum Air Pressure (psi) | 125 |
| Maximum Cycle Rate (CPM) | 112 |
| Maximum Flow Rate (L/min) | 927 |
| Maximum Fluid Pressure (MPa) | 0.86 |
| Maximum Fluid Pressure (bar) | 8.6 |
| Maximum Fluid Pressure (kPa) | 861.8 |
| Maximum Fluid Pressure (psi) | 125 |
| Maximum Operating Temperature (°C) | 80 |
| Maximum Solid Size (cm) | 0.95 |
| Maximum Solid Size (mm) | 9.5 |
| Maximum Working Pressure (psi) | 125 |
| Minimum Operating Temperature (°C) | -10 |
| Model | Husky |
| Power Source | Air |
| Pump Ratio | 1:1 |
| Seat Material | G.E.T. (Graco Engineered Thermoplastic) |
| Series | 3250 |
| Standards Met | CE |
| Type | Pneumatic Diaphragm Pump |
Product Manuals
Sales Literature
