E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, Advanced, ATEX/FM/IECEx, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Wall
EC1262


E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, Advanced, ATEX/FM/IECEx, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Wall
EC1262
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibilit...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.
- Open wet cup has improved durability and includes Ultralife ceramic coating
- Minimal pulsation at changeover provides a more consistent finish
- Electric motor eliminates icing – giving you smoother pump operation and better finished product
- Quiet electric motor improves your work environment allowing you to remain near the pump for longer periods of time
Specifications & Documents
Technical Specifications
Convert to MetricApplication | Circulation |
---|---|
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Outlet Size (in) | 1-1/2 |
Fluid Section Type | Open |
Includes | Advanced Control Input, Wall Mount |
Input Voltage (V ac) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 12 |
Maximum Flow Rate (GPM) | 4 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 2.1 |
Maximum Working Pressure (psi) | 300 |
Minimum Operating Temperature (°F) | 32 |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 1 |
Standards Met | CE, ATEX, FM, IECEx |
Type | Electric Piston Pump |
Application | Circulation |
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (cm) | 3.81 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Outlet Size (cm) | 3.81 |
Fluid Outlet Size (mm) | 38.1 |
Fluid Section Type | Open |
Includes | Advanced Control Input, Wall Mount |
Input Voltage (V ac) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 12 |
Maximum Flow Rate (L/min) | 15.14 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 2.1 |
Maximum Working Pressure (bar) | 20.7 |
Maximum Working Pressure (kPa) | 2070 |
Minimum Operating Temperature (°C) | 0 |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 1 |
Standards Met | CE, ATEX, FM, IECEx |
Type | Electric Piston Pump |
Repair Parts
Part No. | Description |
---|---|
17K664 | Open Wet Cup Pump Lower, 750 cc, Stainless Steel, Ultralife Rod & Cylinder, Tri-Clamp Fittings |
EM0012 | E-Flo DC Motor, 1 hp, Advanced Controls, 220V, ATEX/FM/IECEX |
26A398 | Gear Replacement Kit for E-Flo DC Motors (Series C) |
24W920 | Position Sensor Kit for E-Flo DC Motors |
16U113 | Knob replacement kit |
26A395 | Fan Shaft Replacement Kit |
26A537 | Bolt Kit for E-Flo DC Motors |
24U938 | Encoder Replacement Kit for E-Flo DC Motors |
26A396 | Fan Only Replacement Kit |
26A401 | Gear Replacement Kit for E-Flo DC Motors (Series A & B) |
16J463 | Fan Coupler Kit |
26A399 | Output Shaft Kit for E-Flo DC Motors |
26A442 | Output Seal Kit for E-Flo DC Motors |
26A539 | Fan Cover Kit for E-Flo DC Motors |
26A397 | Rotor Replacement Kit |
24R050 | Pressure Transducer Kit for E-Flo DC Motors |