E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 3000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP00E1


E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 3000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP00E1
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
- Open wet cup has improved durability and includes Ultralife ceramic coating
- 3 times more efficient than pneumatics
- Process control and feedback
- Slow smooth change overs
- Low noise
- Sealed 4-ball version is also available
Specifications & Documents
Technical Specifications
Convert to MetricApplication | Circulation |
---|---|
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 2 |
Fluid Outlet Size (in) | 2 |
Fluid Section Type | Open Wet Cup |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 12 |
Maximum Flow Rate (GPM) | 16.2 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 2.3 |
Maximum Working Pressure (psi) | 330 |
Minimum Operating Temperature (°F) | 32 |
Motor Type | None |
Portable | Non-Portable |
Standards Met | N/A |
Type | Electric Piston Pump |
Wetted Material | Stainless Steel |
Application | Circulation |
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (cm) | 5.08 |
Fluid Inlet Size (mm) | 50.8 |
Fluid Outlet Size (cm) | 5.08 |
Fluid Outlet Size (mm) | 50.8 |
Fluid Section Type | Open Wet Cup |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 12 |
Maximum Flow Rate (L/min) | 61.32 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 2.3 |
Maximum Working Pressure (bar) | 23 |
Maximum Working Pressure (kPa) | 2300 |
Minimum Operating Temperature (°C) | 0 |
Motor Type | None |
Portable | Non-Portable |
Standards Met | N/A |
Type | Electric Piston Pump |
Wetted Material | Stainless Steel |
Product Manuals
311876N, 4-Ball Lower Retrofit Connection Kits, Instructions, Parts List, English
(1 MB)
(English Only)
Certifications
Repair Parts
Part No. | Description |
---|---|
17K666 | 4-Ball Lower, Open Wet Cup, 1500 cc, Stainless Steel, Tri-Clamp Connection |
247341 | Slider Cylinder Collector Kit |
15H871 | Gear Reducer Seal Kit |
15H873 | Drive Linkage Rebuild Kit |
15H882 | Slider Bearing Kit |
15H885 | Ethernet Interface Kit |
15J378 | Crank Arm Cover Kit |
15K012 | Air pressure to the BPR Control Kit |
24E453 | Motor Mounting Kit for IEC 112M/B5 and 100L/B5 Frame Electric Motors, includes motor adapter plate |
24H372 | ACS Module for E-Flo Circulation Pumps |
15H878 | Manifold Gasket Kit |
15J639 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 2 tri-clamp |
289550 | Gear Reducer Replacement Kit for E-Flo 1500 Pumps |
15H874 | Slider Cylinder Rebuild Kit |
24J305 | Sensor Circuit Option Kit for E-Flo Pumps (Series D and later) |
15H877 | TDC Sensor Kit |
15J422 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 1-1/2 npt |
16C487 | Coupler Kit for NEMA 182-184 TC Frame 3 or 5 HP motors. Includes 2.25 in. (57.2 mm) key |
15H880 | Motor coupler kit- to install electric motors on E-Flo® 4-Ball Piston Pumps |
15H883 | Crank Arm Kit |
15H886 | Gear Reducer Replacement Kit for E-Flo 2000/3000/4000 Pumps |
15J926 | Output Shaft Seal Tool Kit |
255216 | Wrist Pin Replacement Kit |
15J423 | Inlet/Outlet Fitting, converts 2 tri-clamp to 2 npt |