E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 3000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP01E1
E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 3000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP01E1
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
- Open wet cup has improved durability and includes Ultralife ceramic coating
- 3 times more efficient than pneumatics
- Process control and feedback
- Slow smooth change overs
- Low noise
- Sealed 4-ball version is also available
Specifications & Documents
Technical Specifications
Convert to Metric| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Type | Open Wet Cup |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Flow Rate (GPM) | 16.2 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 2.3 |
| Maximum Working Pressure (psi) | 330 |
| Minimum Operating Temperature (°F) | 32 |
| Motor Type | None |
| Portable | Non-Portable |
| Standards Met | N/A |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (cm) | 5.08 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Outlet Size (cm) | 5.08 |
| Fluid Outlet Size (mm) | 50.8 |
| Fluid Section Type | Open Wet Cup |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Flow Rate (L/min) | 61.32 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 2.3 |
| Maximum Working Pressure (bar) | 23 |
| Maximum Working Pressure (kPa) | 2300 |
| Minimum Operating Temperature (°C) | 0 |
| Motor Type | None |
| Portable | Non-Portable |
| Standards Met | N/A |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
Product Manuals
311876N, 4-Ball Lower Retrofit Connection Kits, Instructions, Parts List, English
(1 MB)
(English Only)
Certifications
Repair Parts
| Part No. | Description |
|---|---|
| 17K666 | 4-Ball Lower, Open Wet Cup, 1500 cc, Stainless Steel, Tri-Clamp Connection |
| 15H871 | Gear Reducer Seal Kit |
| 15H874 | Slider Cylinder Rebuild Kit |
| 15H880 | Motor coupler kit- to install electric motors on E-Flo® 4-Ball Piston Pumps |
| 15J378 | Crank Arm Cover Kit |
| 15J422 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 1-1/2 npt |
| 15J926 | Output Shaft Seal Tool Kit |
| 247341 | Slider Cylinder Collector Kit |
| 289550 | Gear Reducer Replacement Kit for E-Flo 1500 Pumps |
| 15H885 | Ethernet Interface Kit |
| 15J639 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 2 tri-clamp |
| 24E453 | Motor Mounting Kit for IEC 112M/B5 and 100L/B5 Frame Electric Motors, includes motor adapter plate |
| 15H877 | TDC Sensor Kit |
| 15H882 | Slider Bearing Kit |
| 24J305 | Sensor Circuit Option Kit for E-Flo Pumps (Series D and later) |
| 255216 | Wrist Pin Replacement Kit |
| 15H878 | Manifold Gasket Kit |
| 15H883 | Crank Arm Kit |
| 15J423 | Inlet/Outlet Fitting, converts 2 tri-clamp to 2 npt |
| 15K012 | Air pressure to the BPR Control Kit |
| 24H372 | ACS Module for E-Flo Circulation Pumps |
| 15H873 | Drive Linkage Rebuild Kit |
| 15H886 | Gear Reducer Replacement Kit for E-Flo 2000/3000/4000 Pumps |
| 16C487 | Coupler Kit for NEMA 182-184 TC Frame 3 or 5 HP motors. Includes 2.25 in. (57.2 mm) key |
Recommended Accessories
