E-Flo 4-Ball

E-Flo 4-Ball Electric Circulation Pump, 230/400V 5 HP ATEX, 3000cc, Sealed, Ultralife Rod/Cylinder, Tri-Clamp

EP10B0

E-Flo 4-Ball

E-Flo 4-Ball Electric Circulation Pump, 230/400V 5 HP ATEX, 3000cc, Sealed, Ultralife Rod/Cylinder, Tri-Clamp

EP10B0

The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Questions About this Product?

If you’re not finding the information you need, ask one of our experts.

Ask an Expert

Features

Product Brochure
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
  • Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalyzed coatings
  • 3 times more efficient than pneumatics
  • Process control and feedback
  • Slow smooth change overs
  • Low noise
  • Open wet cup version is also available

Specifications & Documents

Technical Specifications

Convert to Metric
Application Circulation
Compatible Material Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
Fluid Inlet Size (in) 2
Fluid Outlet Size (in) 2
Fluid Section Type Sealed
Input Voltage (V ac) 230/400
Material Stainless Steel
Maximum Continuous Cycle Rate (CPM) 20
Maximum Flow Rate (GPM) 16.2
Maximum Input Amperage (A) 20/15
Maximum Operating Temperature (°F) 104
Maximum Speed (RPM) 1800
Maximum Working Pressure (MPa) 2.3
Maximum Working Pressure (psi) 330
Minimum Operating Temperature (°F) 32
Motor Type AC
Portable Non-Portable
Power Rating (HP) 5
Standards Met CE, ATEX
Type Electric Piston Pump
Wetted Material Stainless Steel
Application Circulation
Compatible Material Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
Fluid Inlet Size (cm) 5.08
Fluid Inlet Size (mm) 50.8
Fluid Outlet Size (cm) 5.08
Fluid Outlet Size (mm) 50.8
Fluid Section Type Sealed
Input Voltage (V ac) 230/400
Material Stainless Steel
Maximum Continuous Cycle Rate (CPM) 20
Maximum Flow Rate (L/min) 61.32
Maximum Input Amperage (A) 20/15
Maximum Operating Temperature (°C) 40
Maximum Speed (RPM) 1800
Maximum Working Pressure (MPa) 2.3
Maximum Working Pressure (bar) 23
Maximum Working Pressure (kPa) 2300
Minimum Operating Temperature (°C) 0
Motor Type AC
Portable Non-Portable
Power Rating (HP) 5
Standards Met CE, ATEX
Type Electric Piston Pump
Wetted Material Stainless Steel

Repair Parts

Part No. Description
255226 Electric Motor Kit, 230/400V, 3 Phase, 5 HP Motor, 1800 rpm for E-Flo 2000/3000/4000 Pumps
17K658 Sealed 4-Ball Lower, 1500 cc, Stainless Steel, Ultralife Rod & Cylinder, Tri-Clamp Fittings
247341 Slider Cylinder Collector Kit
289550 Gear Reducer Replacement Kit for E-Flo 1500 Pumps
15H877 TDC Sensor Kit
15H878 Manifold Gasket Kit
15H885 Ethernet Interface Kit
15H886 Gear Reducer Replacement Kit for E-Flo 2000/3000/4000 Pumps
15J422 Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 1-1/2 npt
24J305 Sensor Circuit Option Kit for E-Flo Pumps (Series D and later)
15H871 Gear Reducer Seal Kit
24H372 ACS Module for E-Flo Circulation Pumps
255216 Wrist Pin Replacement Kit
15J378 Crank Arm Cover Kit
15H883 Crank Arm Kit
15J423 Inlet/Outlet Fitting, converts 2 tri-clamp to 2 npt
15J639 Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 2 tri-clamp
15K012 Air pressure to the BPR Control Kit
24E453 Motor Mounting Kit for IEC 112M/B5 and 100L/B5 Frame Electric Motors, includes motor adapter plate
15J926 Output Shaft Seal Tool Kit
16C487 Coupler Kit for NEMA 182-184 TC Frame 3 or 5 HP motors. Includes 2.25 in. (57.2 mm) key
15H873 Drive Linkage Rebuild Kit
15H874 Slider Cylinder Rebuild Kit
15H880 Motor coupler kit- to install electric motors on E-Flo® 4-Ball Piston Pumps
15H882 Slider Bearing Kit

Recommended Accessories

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7:30 a.m.–5 p.m. Central Time

Email Support

Email Support

Find a Distributor

Find a Distributor

For local sales and service support

Reviews

Graco