E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 230/400V 5 HP ATEX, 2000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP10D1
E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 230/400V 5 HP ATEX, 2000cc, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
EP10D1
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The dual lower of the E-Flo electric circulating pump minimizes pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
- Open wet cup has improved durability and includes Ultralife ceramic coating
- 3 times more efficient than pneumatics
- Process control and feedback
- Slow smooth change overs
- Low noise
- Sealed 4-ball version is also available
Specifications & Documents
Technical Specifications
Convert to Metric| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Type | Open Wet Cup |
| Input Voltage (V ac) | 230/400 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Flow Rate (GPM) | 12 |
| Maximum Input Amperage (A) | 20/15 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Speed (RPM) | 1800 |
| Maximum Working Pressure (MPa) | 3.2 |
| Maximum Working Pressure (psi) | 460 |
| Minimum Operating Temperature (°F) | 32 |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 5 |
| Standards Met | CE, ATEX |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (cm) | 5.08 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Outlet Size (cm) | 5.08 |
| Fluid Outlet Size (mm) | 50.8 |
| Fluid Section Type | Open Wet Cup |
| Input Voltage (V ac) | 230/400 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Flow Rate (L/min) | 45.42 |
| Maximum Input Amperage (A) | 20/15 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Speed (RPM) | 1800 |
| Maximum Working Pressure (MPa) | 3.2 |
| Maximum Working Pressure (bar) | 32 |
| Maximum Working Pressure (kPa) | 3200 |
| Minimum Operating Temperature (°C) | 0 |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 5 |
| Standards Met | CE, ATEX |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
Product Manuals
311876N, 4-Ball Lower Retrofit Connection Kits, Instructions, Parts List, English
(1 MB)
(English Only)
Repair Parts
| Part No. | Description |
|---|---|
| 255226 | Electric Motor Kit, 230/400V, 3 Phase, 5 HP Motor, 1800 rpm for E-Flo 2000/3000/4000 Pumps |
| 17K665 | 4-Ball Lower, Open Wet Cup, 1000 cc, Stainless Steel, Tri-Clamp Connection |
| 15H880 | Motor coupler kit- to install electric motors on E-Flo® 4-Ball Piston Pumps |
| 15H882 | Slider Bearing Kit |
| 15J378 | Crank Arm Cover Kit |
| 15J422 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 1-1/2 npt |
| 24H372 | ACS Module for E-Flo Circulation Pumps |
| 15H874 | Slider Cylinder Rebuild Kit |
| 15H878 | Manifold Gasket Kit |
| 15J926 | Output Shaft Seal Tool Kit |
| 15H885 | Ethernet Interface Kit |
| 15K012 | Air pressure to the BPR Control Kit |
| 15J423 | Inlet/Outlet Fitting, converts 2 tri-clamp to 2 npt |
| 255216 | Wrist Pin Replacement Kit |
| 15H873 | Drive Linkage Rebuild Kit |
| 15H883 | Crank Arm Kit |
| 16C487 | Coupler Kit for NEMA 182-184 TC Frame 3 or 5 HP motors. Includes 2.25 in. (57.2 mm) key |
| 24E453 | Motor Mounting Kit for IEC 112M/B5 and 100L/B5 Frame Electric Motors, includes motor adapter plate |
| 289550 | Gear Reducer Replacement Kit for E-Flo 1500 Pumps |
| 15J639 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 2 tri-clamp |
| 24J305 | Sensor Circuit Option Kit for E-Flo Pumps (Series D and later) |
| 247341 | Slider Cylinder Collector Kit |
| 15H871 | Gear Reducer Seal Kit |
| 15H877 | TDC Sensor Kit |
| 15H886 | Gear Reducer Replacement Kit for E-Flo 2000/3000/4000 Pumps |
Recommended Accessories
