E-Flo DC 2-Ball
E-Flo DC 2-Ball Electric Supply Pump, 145cc, 2 HP, Basic Controls, ATEX/IECEx/TIIS/KCS, Dura-Flo Lower, Stand
Part Number: ES7761
E-Flo DC 2-Ball
E-Flo DC 2-Ball Electric Supply Pump, 145cc, 2 HP, Basic Controls, ATEX/IECEx/TIIS/KCS, Dura-Flo Lower, Stand
Part Number: ES7761
Our 2-ball supply pump is for applications requiring high pressure, up to 3000 psi (206 bar)
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Our 2-ball supply pump is for applications requiring high pressure, up to 3000 psi (206 bar)
- Five times more efficient compared to similar sized pneumatic pumps
- Operate the pump two different ways - constant pressure or constant flow rate
- Quiet electric motor improves your work environment allowing you to remain near the pump for longer periods of time
- Minimal pulsation at changeover provides a more consistent finish
- Integrated runaway protection protects your pump from premature wear and prevents costly material loss
Specifications & Documents
Technical Specifications
Convert to MetricApplication | Supply |
---|---|
Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Inlet Thread Gender | Female |
Fluid Inlet Thread Type | NPT |
Fluid Outlet Size (in) | 3/4 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Fluid Section Type | 2-Ball |
For Use With | E-Flo DC Motor |
Includes | Basic Controls, PTFE/Leather Packings, Stand |
Input Voltage (V ac) | 200-250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (GPM) | 0.77 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 21 |
Maximum Working Pressure (psi) | 3040 |
Minimum Operating Temperature (°F) | 32 |
Model | E-Flo |
Motor Type | BLDC |
Portable | Non-Portable |
Power Rating (HP) | 2 |
Series | DC 2-Ball |
Type | Electric Piston Pump |
Application | Supply |
Compatible Material | Solventborne, High Solids, Xirallic, CARC, Metallics |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Inlet Thread Gender | Female |
Fluid Inlet Thread Type | NPT |
Fluid Outlet Size (in) | 3/4 |
Fluid Outlet Size (mm) | 19.05 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Fluid Section Type | 2-Ball |
For Use With | E-Flo DC Motor |
Includes | Basic Controls, PTFE/Leather Packings, Stand |
Input Voltage (V ac) | 200-250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (L/min) | 2.91 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 21 |
Maximum Working Pressure (bar) | 210 |
Maximum Working Pressure (kPa) | 21000 |
Maximum Working Pressure (psi) | 3040 |
Minimum Operating Temperature (°C) | 0 |
Model | E-Flo |
Motor Type | BLDC |
Portable | Non-Portable |
Series | DC 2-Ball |
Type | Electric Piston Pump |
Repair Parts
Part No. | Description |
---|---|
100101 | Bolt |
100133 | Washer |
247168 | Dura-Flo 600 (145 cc) Lower, SST, Severe-Duty Rod and Cylinder, 4 Leather/1 PTFE Backup Packings, use with NXT 2200 size motors |
256193 | Floor Stand |
EM0023 | E-Flo DC Motor, 2 hp, Basic Controls, 220V, ATEX/FM/TIIS/KCS |
255143 | NXT Wall Mounting Kit |