SaniForce 3150 3A
SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmolded EPDM Diaphragm & 2 in Inlet/Outlet
Part Number: SA2AAA
SaniForce 3150 3A
SaniForce 3150 HS 3A Approved Pump with PTFE Ball, Overmolded EPDM Diaphragm & 2 in Inlet/Outlet
Part Number: SA2AAA
The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry. Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.
Up to a 4.0 in. (10 cm) tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm sanitary pump has flow rates up to 150 gpm (568 lpm) and is 3A certified.
SaniForce 3150 3A Double Diaphragm Pump:
- Pumps up to 150 gpm (567 lpm) (568 lpm)
- Pump rotates 360° for easy draining
- The only 3 in. (7.62 cm) pump certified by 3A for dairy applications
- Featuring our lube free, non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles - up to 20,000 cps
- Suitable to pump products such as: flowable sour cream, yogurt and flowable cheese spreads
Designed to detect leaks!
- Electronic leak detector is standard on the 3150 3A models
- Designed to detect leaks caused when a diaphragm fails
- Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
- Uses an optical and conductivity sensor to ensure the utmost reliability
- Powered by either 24v or 110/220v
EPDM Overmolded Diaphragms:
- Approved for 3A applications
- Easy cleaning with smooth, flat surfaces and no recessed areas
- No exposed diaphragm plates to reduce contaminant collection
Specifications & Documents
Technical Specifications
Convert to MetricAir Exhaust Port Size (in) | 3/4 |
---|---|
Air Exhaust Port Thread Gender | Female |
Air Exhaust Port Thread Type | NPT |
Air Inlet Size (in) | 1/2 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Application | Sanitary |
Ball Material | PTFE |
Center Section Material | Stainless Steel |
Compatible Material | Food, Personal Care, Pharmaceutical |
Connection Type | Tri-Clamp |
Diaphragm Compatible Material | EPDM |
Diaphragm Material | EPDM Overmold |
Fluid Inlet Size (in) | 2 |
Fluid Outlet Size (in) | 2 |
Fluid Section Material | Stainless Steel |
For Use With | Food, Personal Care, Pharmaceutical |
Includes | Leak Detector, Pump Stand |
Manifold Configuration | Center Port |
Manifold O-Ring Material | EPDM |
Material | Stainless Steel |
Maximum Air Consumption (SCFM) | 175 |
Maximum Air Pressure (MPa) | 0.8 |
Maximum Air Pressure (psi) | 120 |
Maximum Cycle Rate (CPM) | 145 |
Maximum Flow Rate (GPM) | 160 |
Maximum Fluid Pressure (MPa) | 0.8 |
Maximum Fluid Pressure (psi) | 120 |
Maximum Solid Size (in) | 1 |
Model | SaniForce |
Power Source | Air |
Pump Ratio | 1:1 |
Seat Material | Stainless Steel |
Series | 3150 3A |
Standards Met | ATEX, CE, 3A, FDA Compliant Materials |
Type | Pneumatic Diaphragm Pump |
Air Exhaust Port Size (in) | 3/4 |
Air Exhaust Port Thread Gender | Female |
Air Exhaust Port Thread Type | NPT |
Air Inlet Size (in) | 1/2 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Application | Sanitary |
Ball Material | PTFE |
Center Section Material | Stainless Steel |
Compatible Material | Food, Personal Care, Pharmaceutical |
Connection Type | Tri-Clamp |
Diaphragm Compatible Material | EPDM |
Diaphragm Material | EPDM Overmold |
Fluid Inlet Size (cm) | 5.08 |
Fluid Inlet Size (in) | 2 |
Fluid Inlet Size (mm) | 50.8 |
Fluid Outlet Size (cm) | 5.08 |
Fluid Outlet Size (in) | 2 |
Fluid Outlet Size (mm) | 50.8 |
Fluid Section Material | Stainless Steel |
For Use With | Food, Personal Care, Pharmaceutical |
Includes | Leak Detector, Pump Stand |
Manifold Configuration | Center Port |
Manifold O-Ring Material | EPDM |
Material | Stainless Steel |
Maximum Air Pressure (MPa) | 0.8 |
Maximum Air Pressure (bar) | 8 |
Maximum Air Pressure (kPa) | 800 |
Maximum Air Pressure (psi) | 120 |
Maximum Cycle Rate (CPM) | 145 |
Maximum Flow Rate (L/min) | 606 |
Maximum Fluid Pressure (MPa) | 0.8 |
Maximum Fluid Pressure (bar) | 8 |
Maximum Fluid Pressure (kPa) | 800 |
Maximum Fluid Pressure (psi) | 120 |
Maximum Solid Size (cm) | 2.54 |
Maximum Solid Size (mm) | 25.4 |
Model | SaniForce |
Power Source | Air |
Pump Ratio | 1:1 |
Seat Material | Stainless Steel |
Series | 3150 3A |
Standards Met | ATEX, CE, 3A, FDA Compliant Materials |
Type | Pneumatic Diaphragm Pump |