E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 1500cc, 3 HP, 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, SiNi, Wall Mount
Part Number: YB4592
E-Flo Dci 4-Ball
E-Flo DCi 4-Ball Electric Pump, 1500cc, 3 HP, 380-480 VAC 3 Phase, SST Ultralife Lower, Tri-Clamp, SiNi, Wall Mount
Part Number: YB4592
Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate.
Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.
- 3 horse power (HP) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
- ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
- Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
- Stainless steel (SST) lower is coated with Ultralife for extensive durability.
- Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.
- Wall mount takes so little space that it can fit almost anywhere in a factory paint mix room.
- DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
Specifications & Documents
Technical Specifications
Convert to MetricApplication | Circulation |
---|---|
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
Cycles Per Gallon | 2.5 |
Fluid Inlet Size (in) | 1.5 |
Fluid Inlet Thread Type | Sanitary Quick Clamp |
Fluid Outlet Size (in) | 1.5 |
Fluid Outlet Thread Type | Sanitary Quick Clamp |
Fluid Section Type | Sealed 4-Ball |
Includes | Basic Controls, Wall Mount |
Input Voltage (V ac) | 380 - 480 |
Lower Type | Sealed 4-Ball |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (GPM) | 7.9 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 3.1 |
Maximum Working Pressure (psi) | 450 |
Minimum Operating Temperature (°F) | 32 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 3 |
Series | Dci 4-Ball |
Type | Electric Piston Pump |
Application | Circulation |
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne |
Cycles Per Gallon | 2.5 |
Fluid Inlet Size (in) | 1.5 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Inlet Thread Type | Sanitary Quick Clamp |
Fluid Outlet Size (in) | 1.5 |
Fluid Outlet Size (mm) | 38.1 |
Fluid Outlet Thread Type | Sanitary Quick Clamp |
Fluid Section Type | Sealed 4-Ball |
Includes | Basic Controls, Wall Mount |
Input Voltage (V ac) | 380 - 480 |
Lower Type | Sealed 4-Ball |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (L/min) | 30 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 3.1 |
Maximum Working Pressure (bar) | 31 |
Maximum Working Pressure (kPa) | 3102.8 |
Maximum Working Pressure (psi) | 450 |
Minimum Operating Temperature (°C) | 0 |
Model | E-Flo |
Motor Type | AC |
Output Per Cycle (cm³) | 1500 |
Portable | Non-Portable |
Series | Dci 4-Ball |
Type | Electric Piston Pump |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)