G-Mini Pumps
Robust, reliable and packed with power, the compact G-Mini® lubrication pump is built with rugged materials to handle small-scale lubrication, while withstanding the rigors of most environments, including harsh climates and worksites.
SMALL SIZE. BIG VALUE. HUGE IMPACT.
- Extend uptime on a wider range of equipment.
- Deploy automatic lubrication on smaller machines, or on equipment with fewer lubrication points — making it a right-sized, right-priced solution for your fleet.
- Accommodates those with specific small-scale applications previously forced to pay for an oversized, overqualified auto lube system.
FREE FLUID CHAT EVENT
Same Old Problem, Innovative Solutions
Real Stories from Real People Showcasing Their Successes with the Latest in Automatic Lubrication
G-Series Pump Comparison Guide
Browse G-Mini Pumps
Documents & Videos
NAME
Language
Size
File Type
Download
NAME
Language
Size
File Type
Download
Graco G-Series Pump Comparison Guide
G-Mini Pump | G1 Pump | G3 Pump | |
---|---|---|---|
Reservoir | 0.5 and 1 L Include stir paddle and follower plate | 2, 4 and 8 L Include stir paddle; follower plate available | 2, 4, 8, 12, 16 and 20 L Include stir paddle; follower plate available |
Fluids | Grease up to NLGI #2 | Oil, Grease up to NLGI #2 | Oil, Grease up to NLGI #2 |
Power Source | 12 VDC or 24 VDC | 90-230 VAC, 12 VDC or 24 VDC | 90-230 VAC, 12 VDC or 24 VDC |
Control | Standard and Controller | Standard and Plus | Standard, Pro, SP, Max |
Control Features | One controller with 2 options:
Cycle-Based:
| Plus controller:
| Pro and Max controllers:
*Max controller only SP controller:
|
Power Cord | CPC; sold separately | DIN or CPC; sold separately | DIN or CPC; included |
Pump Element | 2 maximum; 1 factory-installed | 1 maximum; 1 factory-installed | 3 maximum; 1 factory-installed |
Output Per Pump | 0.18 in3 (3 cm3 ) / min | 0.25 in3 (4 cm3 ) / min | 0.25 in3 (4 cm3 ) / min |
Maximum Working Pressure | 4,100 psi (28 MPa, 280 bar) | 5,100 psi (35 MPa, 352 bar) | 5,100 psi (35 MPa, 352 bar) |
Metering Device | Series Progressive | Series Progressive | Series Progressive or Single Line Parallel (with addition of a G3 Vent Valve) |
Monitoring | Controller can monitor 1 zone for cycles | None | SP controller can monitor 1 sensor for cycles; Max controller can monitor up to 3 independent sensors for cycles or pressure |
Proximity or Cycle Switch Type | PNP | Pump has no cycle input | PNP or NPN |
Electric Motor | Inline gear box | Load minimizing drive with offset cam design | Load minimizing drive with offset cam design |
Accessories | Uses most G3 accessories including pressure relief, power cables, high flow fill stud, 5-gallon fill pump | Uses most G3 accessories including pressure relief, power cables, high-flow fill stud, 5-gallon fill pump | See G3 Accessories in ILE Buyer’s Guide |