Graco Inc.

Reactor E-10hp  Equipo de recubrimiento de alta presión para poliurea

Sistema para usuarios principiantes para recubrimientos de poliurea pura e híbrida

Dónde comprarSolicitar información
20130515_174156_sm

Haga crecer su negocio con proyectos que involucren poliurea

Si usted quisiera agregar proyectos que involucren poliurea a su oferta, el dosificador de alta presión Reactor E-10hp es una inversión inteligente y asequible que le puede ayudar con el crecimiento de su negocio.

El Reactor E-10hp otorga la potencia y el rendimiento de presión elevada que usted necesita para pulverizar recubrimientos de poliurea. Es liviano y portátil, y funciona con electricidad residencial para que no tenga que invertir en un generador.

Tiempos de puesta en marcha rápidos

Con la función innovadora de aceleramiento del calor y los tanques aislados del sistema, los materiales se calientan rápido para que usted esté listo para comenzar antes. De hecho, está listo para pulverizar en 20 minutos*, frente al tiempo de puesta en marcha de más de una hora de un Reactor E-10 estándar. Consulte el cuadro a continuación.

*Con un modelo de 240 V


  • Ideal para proyectos pequeños a medianos tales como terrazas, piscinas, balcones,
    tanques, revestimientos de cajas de camión, contenedores secundarios e impermeabilización
  • Calienta los materiales de forma más rápida para una mejor productividad
  • Portátil, compacto y fácil de maniobrar
  • Fácil de utilizar
  • Utiliza toma de corriente residencial estándar
  • Asequible 

chart_Pres_Flow

Este cuadro determina el suministro de material en base a la presión y la cámara de mezcla seleccionada. Por ejemplo:

  • A 2200 psi con una cámara de mezcla AW2222, el suministro es de casi 0,9 gpm
  • A 1800 psi con una cámara de mezcla AR2929, el suministro es de casi 1 gpm 


E10h_chart_MaxTemp

Use este cuadro para determinar qué modelo de Reactor E-10 es el más adecuado para sus necesidades. Este cuadro determina los tiempos de recirculación y las temperaturas del tanque necesarios para lograr su temperatura de pulverización final.

  • La porción curva de la línea representa la temperatura del tanque.
  • La porción recta y vertical de la línea representa el Delta T de los calentadores principales.

Para calcular las temperaturas del tanque necesarias, réstele el Delta T a sus temperaturas de pulverización deseadas.

Reactor E-10hp
Maximum fluid working pressure
3000 psi
20.6 MPa, 206 bar
Maximum spray pressure: 120 V
2200 psi
15.2 MPa, 152 bar
Maximum spray pressure: 230 V
2500 psi
17.2 MPa, 172 bar
Maximum fluid temperature
170°F
77°C
Maximum ambient temperature
120°F
48°C
Maximum output
1 gal/min
3.8 liters/min
Output per cycle (ISO and RES)
0.0038 gallons/cycle
0.014 liters/cycle
Air inlet
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
Air outlet
1/4 npsm(m)
1/4 npsm(m)
Overpressure relief
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Maximum hose length
105 ft
32 m
Tank capacity each (nominal)
6 gal
22.7 liters
Weight (empty)
239 lb
108 kg
<b >Recommended Mix Chamber Sizes
Fusion® Air Purge
000, AW2222 (00 and 01 at reduced spray pressure)
000, AW2222 (00 and 01 at reduced spray pressure)
Probler® P2
AA (00 and 01 at reduced spray pressure)
AA (00 and 01 at reduced spray pressure)
<b >Electrical Requirements
120 V
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
230 V
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
Generator Size
120 V
5000 W minimum
5000 W minimum
230 V
7500 W minimum
7500 W minimum
Heater Power
120 V
3000 W during recirculation, 2000 W during pressure spray mode
3000 W during recirculation, 2000 W during pressure spray mode
230 V
4000 W during recirculation, 2760 W during pressure spray mode
4000 W during recirculation, 2760 W during pressure spray mode
Sound Pressure
In fast recirculation mode
71.3 dB(A)
71.3 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
85.6 dB(A)
85.6 dB(A)
Sound Power Sound power measured per ISO-9614-2.
In fast recirculation mode
79.9 dB(A)
79.9 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
93.3 dB(A)
93.3 dB(A)
Fluid Outlets
ISO Side
-5 JIC male
-5 JIC male
RES Side
-6 JIC male
-6 JIC male
Fluid Circulation Returns
ISO side
-5 JIC male
-5 JIC male
RES side
-6 JIC male
-6 JIC male
Hose Markings
ISO side
Red
Red
RES side
Blue
Blue
Wetted Parts
Wetted parts on all models
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.



Reactor E-10hp
Maximum fluid working pressure
3000 psi
20.6 MPa, 206 bar
Maximum spray pressure: 120 V
2200 psi
15.2 MPa, 152 bar
Maximum spray pressure: 230 V
2500 psi
17.2 MPa, 172 bar
Maximum fluid temperature
170°F
77°C
Maximum ambient temperature
120°F
48°C
Maximum output
1 gal/min
3.8 liters/min
Output per cycle (ISO and RES)
0.0038 gallons/cycle
0.014 liters/cycle
Air inlet
1/4 in. quick-disconnect industrial type pin fitting
1/4 in. quick-disconnect industrial type pin fitting
Air outlet
1/4 npsm(m)
1/4 npsm(m)
Overpressure relief
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min)
Maximum hose length
105 ft
32 m
Tank capacity each (nominal)
6 gal
22.7 liters
Weight (empty)
239 lb
108 kg
Recommended Mix Chamber Sizes
Fusion® Air Purge
000, AW2222 (00 and 01 at reduced spray pressure)
000, AW2222 (00 and 01 at reduced spray pressure)
Probler® P2
AA (00 and 01 at reduced spray pressure)
AA (00 and 01 at reduced spray pressure)
Electrical Requirements
120 V
100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
100–120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit
230 V
200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
200–230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit.
Generator Size
120 V
5000 W minimum
5000 W minimum
230 V
7500 W minimum
7500 W minimum
Heater Power
120 V
3000 W during recirculation, 2000 W during pressure spray mode
3000 W during recirculation, 2000 W during pressure spray mode
230 V
4000 W during recirculation, 2760 W during pressure spray mode
4000 W during recirculation, 2760 W during pressure spray mode
Sound Pressure
In fast recirculation mode
71.3 dB(A)
71.3 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
85.6 dB(A)
85.6 dB(A)
Sound Power (Measured per ISO-9614-2)
In fast recirculation mode
79.9 dB(A)
79.9 dB(A)
Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm)
93.3 dB(A)
93.3 dB(A)
Fluid Outlets
ISO Side
-5 JIC male
-5 JIC male
RES Side
-6 JIC male
-6 JIC male
Fluid Circulation Returns
ISO side
-5 JIC male
-5 JIC male
RES side
-6 JIC male
-6 JIC male
Hose Markings
ISO side
Red
Red
RES side
Blue
Blue
Wetted Parts
Wetted parts on all models
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.