Graco Inc.

Bombas y paquetes de la Serie LD  Bomba de pistón neumática

Descubra el valor de las bombas de la Serie LD de Graco

Dónde comprarSolicitar información
Compartir |

Manténgase al frente de la competencia con las Bombas de la Serie LD. Estas bombas asequibles y con todas las funciones están diseñadas para aplicaciones de menor volumen y están disponibles en 3:1 y 5:1 para aceite y 50:1 para grasa. Estas bombas están ajustadas para una solución compacta y flexible pero increíblemente durable.

LD Series Oil Pump

Usted trabaja duro para brindar un buen servicio y eso es exactamente lo que nosotros tenemos en mente cuando diseñamos los Paquetes de la Serie LD Ya sea que su entrega se encuentre en el patio de su casa o a 50 millas de distancia, los Paquetes LD hacen el trabajo de manera confiable. Usted puede confiar en el equipo de Graco para reducir las horas de reparación y así poder concentrarse en las entregas y mejorar el resultado final. 

Todos los medidores de los paquetes LD vienen de forma estándar  con protector de gatillo, bota protectora para manguera y boquilla automática. 

LD_Series_5-1_Oil_Tote_Package
  • Three Inch Air Motor – Provides more power to create better flow.
  • NXT Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.
  • Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
  • Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

Ver valores en unidades métricas. Ver valores en unidades de EE. UU..

LD Series Oil Pump
Maximum Fluid Working Pressure
750 psi
51.7 bar, 5.17 MPa
Fluid Pressure Ratio
3:1 or 5:1
3:1 or 5:1
Suction Lift (feet of oil)
10
10
Air Operation Range
20 to 150 psi
1.37 to 10.3 bar, 0.137 to 1.03 MPa
Recommended Air Pressure for Optimum Pump Life
Less than 125 psi
8.6 bar, 0.86 MPa
Air Consumption (at 100 psi)
See Performance Curves in instruction manual 3A1334
See Performance Curves in instruction manual 3A1334
Cycles per gallon (liter)
3:1 – 29 cycles/gal, 5:1 – 37 cycles/gal
3:1 – 7 cycles/l, 5:1 – 10 cycles/l
Maximum Recommended Pump Speed
3:1 – 120 cycles/min, 5:1 – 180 cycles/min
3:1 – 120 cycles/min, 5:1 – 180 cycles/min
Recommended Speed for Optimum Pump Life
75 cycles/min and lower, 3:1 – 2.6 gal/min, 5:1 – 2 gal/min
75 cycles/min and lower, 3:1 – 9.8 l/min, 5:1– 7.6 l/min
Wetted parts
zinc plated carbon, steel, aluminum, nitrile, polyurethane, nickel plated aluminum
zinc plated carbon, steel, aluminum, nitrile, polyurethane, nickel plated aluminum
Sound Pressure Level, calculated at a distance of 1 meter from measurements taken per ISO 9614–2 @ 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minutes. Muffler 112933 can be ordered separately for reduced sound levels.
72.9 dB(a)
72.9 dB(a)
Sound Power Level, measured per ISO 9614–2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute. Muffler 112933 can be ordered separately for reduced sound levels.
82.0 dB(a)
82.0 dB(a)
Performance Curve
See charts in instruction manual 3A1334
See charts in instruction manual 3A1334
LD Series Grease Models
Maximum Fluid Working Pressure
7500 psi
517 bar, 51.7 MPa
Fluid Pressure Ratio
50:1
50:1
Air Operation Range
20 to 150 psi
1.37 to 10.3 bar, 0.137 to 1.03 MPa
Air Consumption (at 100 psi)
See performance curve in instruction manual 3A1334
See performance curve in instruction manual 3A1334
Pump Cycles per pound (cycles per kg)
47 cycle/lb
103 cycle/kg
Maximum Recommended Pump Speed
120 cycles/min
120 cycles/min
Recommended Speed for Optimum Pump Life
60 cycles/min of lower flow rate, 1.3 lb/min
60 cycles/min or lower flow rate, 0.6 kg/min
Wetted parts
steel, brass, nitrile rubber, polyurethane, UHMWPE, acetal
steel, brass, nitrile rubber, polyurethane, UHMWPE, acetal
Sound Pressure Level, calculated at a distance of 1 meter from measurements taken per ISO 9614–2 @ 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minutes. Muffler 112933 can be ordered separately for reduced sound levels.
72.9 dB(a)
72.9 dB(a)
Sound Power Level, measured per ISO 9614–2 at 100 psi air pressure (6.89 bar, 0.68 MPa) and 20 cycles per minute. Muffler 112933 can be ordered separately for reduced sound levels.
82.0 dB(a)
82.0 dB(a)
Performance Curve
See Chart in instruction manual 3A1334
See Chart in instruction manual 3A1334
Approximate Weight
35 lb drum – 11.2 lb, 120 lb drum – 15.0 lb, 400 lb drum – 170.0 lb
35 lb drum – 5.1 kg, 120 lb drum – 6.8 kg, 400 lb drum – 7.7 kg