Graco Inc.

Dosificadores ProMix 2KE  Dosificadores de componentes plurales compacto y para usuarios principiantes

Dosificador compacto, para usuarios principiantes, disponible en versiones de bomba y de medidor para todas las tecnologías de pulverización

Dónde comprarSolicitar información

El ProMix 2KE, disponible en versiones de bomba y de medidor para todas las tecnologías de pulverización, hace FÁCIL el acabado con componentes plurales. Diseñado para aplicaciones de componentes duales, multicolores y en cabina.


Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts. 

19926
  • Diseñados para aplicaciones de componentes duales, multicolores y en cabina
  • Elija entre los sistemas de componentes plurales basados en bomba o en medidor
  • Manténgase dentro de los límites de tolerancia definidos hasta ±1 % con la versión de medidor y ±2 % con la versión de bomba
  • El material que exceda dichos límites no llegará al producto, evitando el reproceso costoso
  • Válvulas de fluido estilo cartucho de fácil reparación
  • Posibilidad de programar los recordatorios de mantenimiento
ProMix 2KE Plural Component Proportioner LCD Display

Pantalla LCD

  • Se eleva hasta 10 pies con cable estándar
  • Funciones de operación sencillas: espera, pulverización, purga y lavado
  • Muestra la proporción de mezcla, el tiempo de vida útil de la mezcla y el caudal del material
  • Los colores se cambian fácilmente en unidades métricas
  • Pantalla de uso de material para monitorear costos y preparar informes medioambientales
  • Recordatorios de mantenimiento ajustables: ciclos de bomba, ciclos de válvula y días de filtro

Manuales

Otros recursos

ProMix 2KE Meter-Based System
Maximum fluid working pressure
3000 psi
275.8 bar, 27.58 MPa
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30.0:1
0.1:1–30.0:1
On-ratio accuracy
up to +/- 1%, user selectable
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes
Fluid inlet sizes
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
200 lb
91 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
75–3800 cc/min
G3000HR, G250HR Meter
0.01–0.50 gpm
38–1900 cc/min
Coriolis Meter
0.005–1.00 gpm
20–3800 cc/min
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
38–1900 cc/min
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix 2KE
Maximum fluid working pressure
See Manual 3A0868.
See Manual 3A0868.
Maximum working air pressure
100 psi
0.7 MPa, 7 bar
Air supply
75 to 100 psi
0.5 to 0.7 MPa, 5.2 to 7 bar
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1 to 30:1
0.1:1 to 30:1
Viscosity range of fluid
20 to 5000 cps
20 to 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
85 - 250 Vac, 50/60 Hz, 2 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Operating temperature range
41° to 122°F
5° to 50°C
Approximate weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Fluids handled
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component:solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
On-ratio accuracy
1:1 to 10:1 Mixing Ratio
± 2%
± 2%
10.1:1 to 30:1 Mixing Ratio
± 5%
± 5%
Noise level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
Below 85 dBA
Below 85 dBA
Materials of construction
Wetted materials on all models
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE
303, 304 SST; Tungsten carbide (with nickel binder);perfluoroelastomer; PTFE

ProMix 2KE Pump-Based System
Maximum fluid working pressure
See the ProMix 2KE manual.
See the ProMix 2KE manual.
Maximum working air pressure
100 psi
7.0 bar, 0.7 MPa
Air supply
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1–30:1
0.1:1–30:1
On-ratio accuracy
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
1:1 to 10:1 Mixing Ratios: +/- 2%, 10:1 to 30:1 Mixing Ratios: +/- 5%
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
5–50°C
Approximate Weight
300 lb
136 kg
Environmental conditions rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA

ProMix® 2KE
Maximum fluid working pressure
See Hazardous Location Models in manual 3A0870
See Hazardous Location Models in manual 3A0870
Maximum working air pressure
100 psi
7 bar , 0.7 MPa
Air supply
75 - 100 psi
5.2 - 7 bar, 0.5 - 0.7 MPa
Air filter inlet size
3/8 npt(f)
3/8 npt(f)
Air filtration for air logic (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
0.1:1- 30:1
0.1:1- 30:1
On-ratio accuracy
up to ±1%, user selectable
up to ±1%, user selectable
Fluids handled
one or two component:
solvent and waterborne paints
solvent and waterborne paints
polyurethanes
epoxies
acid catalyzed varnishes
moisture sensitive isocyanates
Viscosity range of fluid
20- 5000 cps
20- 5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
100 mesh minimum
Fluid flow rate range
G3000, G250 Meter
0.02-1.00 gal/min
75 - 3800 cc/min.
G3000HR, G250HR Meter
0.01-0.50 gal/min
38 - 1900 cc/min.
Coriolis Meter
0.005-1.00 gal/min
20 - 3800 cc/min.
S3000 Solvent Meter (accessory)
0.01-0.50 gal/min
38 - 1900 cc/min.
Fluid inlet sizes
Flow Meter
1/4 npt(f)
1/4 npt(f)
Dose Valve/Color Valve Adapters
1/4 npt(f)
1/4 npt(f)
Fluid outlet size (static mixer)
1/4 npt(f)
1/4 npt(f)
External Power Supply Requirements
85 15 amp maximum circuit breaker required-
85 15 amp maximum circuit breaker required-
250 Vac, 50/60 Hz, 2 amps maximum draw
250 Vac, 50/60 Hz, 2 amps maximum draw
8 to 14 AWG power supply wire gauge
Operating temperature range
41- 122° F
5-50° C
Approximate Weight
Meter Systems
200 lb
91 kg
Pump Systems
300 lb
136 kg
Environmental Conditions Rating
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
Noise Level
Sound pressure level
below 70 dBA
below 70 dBA
Sound power level
below 85 dBA
below 85 dBA
Wetted parts
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE
303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE