Graco Inc.

Hydra-Cat 固定比例  机械配比器

多泵下缸体设计,双组份材料准确配比

购买地点小帮手咨询信息

Hydra-Cat 定比机械配比器,通过一个共用气动马达为两三个容积泵精确泵送双组份材料。这保证了在固定配比下,所有泵下缸体的冲程速率与冲程长度完全统一。

带有两个相同规格泵下缸体的产品可实现压力平衡,可防止密封件过早磨损。如需实现多种混合比,可选用带有三个不同规格泵下缸体与汽缸的型号。

查看您的 Hydra-Cat 是否有更新产品? 请参见固瑞克 XP 双组份喷涂机系列。

  • 兼具耐磨损性与耐久性的重负荷泵下缸体
  • 多泵下缸体配置,实现更多混合比率
  • 双泵下缸体,提供稳定的 1:1 混合比
  • 三泵下缸体,提供超过 1:1 的混合比,达到泵送平衡
  • PTFE 密封件是 Hydra-Cat 泵下缸体的标配

President Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
0.3–0.7 MPa, 3–7 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 210 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 210 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, Tungsten carbide, fluoroelastomer
303 stainless steel, Tungsten carbide, fluoroelastomer
Sound, Tested in accordance with ISO 9614–2.
Sound pressure levels (dBa), (Input air pressures at 15 cycles/min.)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
Sound power levels (dBa), (Input air pressures at 15 cycles/min.)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. Xper minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.

Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
280–700 kPa, 2.8–6.37 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 207 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 207 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, tungsten carbide, fluoroelastomer
303 stainless steel, tungsten carbide, fluoroelastomer
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.