Graco Inc.

WB3000  气动水性隔离系统

简单而可靠的隔离水性涂料方法

购买地点小帮手咨询信息

Graco 的 WB3000 是在使用静电设备喷涂时用于隔离水性涂料的可靠方式。 非常适合喷漆柜系统。

  • Pro Xp60 AA WB 喷枪非常适合高压水性涂料喷涂,可获得出众的表面处理质量和操作员舒适度
  • Merkur ES 30:1 泵是最有效的喷雾器之一,旨在使用最少的涂料及降低耗气量和脉动
  • 标准电压显示屏便于监控电压和整体性能
  • 采用简单的 5 加仑(19 升)提桶设计,易于变色及清洗系统
  • 静电喷枪智能控制装置帮助分析性能、适应电压需求及更方便地排除故障
  • 便携式机柜增强了移动性,适合各种不同的应用

WB3000 Isolation System and Pro Xp 60 AA WB Gun
Maximum Working Fluid Pressure
3000 psi
21 MPa, 210 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Maximum Fluid Operating Temperature
120°F
48°C
Short Circuit Current Output
125 microamperes
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M508 installed. H60T18: 60 kV. H60M18: 30–60 kV
0.35 J with fluid hose 24M508 installed. H60T18: 60 kV. H60M18: 30–60 kV
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A), at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A), at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A), at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A), at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in. OD tube fitting
10 mm OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Merkur Pump: See manual 3A0732.
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Merkur Pump: See manual 3A0732.