Reactor A-XP1 Air-Driven Coatings Proportioner
For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute
The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
- Maintains temperature setpoints for better yield
- Maintains consisten output pressure for uniform spray pattern
- Easy to operate and maintain
- Best choice for affordability and durability
Brugerhåndbøger
Litteratur
- 300615ENEU Reactor™ Spray Foam and Polyurea Equipment [andre sprog]
- 349104ENEU Hoses, Guns and Accessories [andre sprog]
- 300738ENEU SHIP & RIG BUILDING [andre sprog]
- 349435EN-A, Reactor Maintenance Schedule (Kun engelsk)
- 349890EN, Spray Foam Equipment Brochure (Kun engelsk)
- 350238ENEU White Paper Ratio Assurance [andre sprog]
300615ENEU Reactor™ Spray Foam and Polyurea Equipment
349104ENEU Hoses, Guns and Accessories
Reactor A-XP1 Plural Component Proportioner | |
Maximum Fluid Working Pressure | 3500 psi 24 MPa, 241 bar |
Maximum Air Supply Pressure | 125 psi 0.9 MPa, 9 bar |
Maximum Air Working Pressure | 100 psi 689 MPa, 6.9 bar |
Pressure Ratio | 35:1 35:1 |
Air consumption with 00 tip at 2000 psi stall pressure | 32 scfm 0.9m³/min |
Machine Maximum Power with hose | 13,000 Watts 13,000 Watts |
Amperage Requirement (Full Load Peak)* | 56 amps @ 230 V, 1 Phase, 45 amps @ 230 V, 3 Phase, 26 amps @ 380 V, 3 Phase 56 amps @ 230 V, 1 Phase, 45 amps @ 230 V, 3 Phase, 26 amps @ 380 V, 3 Phase |
Maximum Heater Fluid Temperature | 190°F 88°C |
Maximum Hose Fluid Temperature | 180°F 82°C |
Maximum Ambient Temperature | 120°F 49°C |
Maximum Output | 1.5 gal/min at 2000 psi 1.5 gal/min at 2000 psi |
Output Per Cycle (A and B) | 0.017 gal/cycle 0.094 ltr/cycle |
Heater Power | 10,200 Watts 10,200 Watts |
Hose Power | 2790 Watts 2790 Watts |
Sound Pressure (see NXT air motor manual) | 70.2 dB(A) 70.2 dB(A) |
Sound Power (see NXT air motor manual) | 80.1 dB(A) 80.1 dB(A) |
Viscosity Range | 250–1500 centipoise (typical) 250–1500 centipoise (typical) |
Maximum Fluid Inlet Pressure | 300 psi or 15% of output pressure 2.1 MPa, 21 bar or 15% of output pressure |
Fluid Inlet/Strainer Filter | 20 mesh standard 20 mesh standard |
Air inlet Filter Mesh | 40 Micron 40 Micron |
Component B (Resin) Inlet | 3/4 npt(f) swivel 3/4 npt(f) swivel |
Component A (Isocyanate) Inlet | 3/4 npt(f) swivel 3/4 npt(f) swivel |
Recirculation/Block Hose Connections | Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m) Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m) |
Maximum Heated Hose Length *** | 210 ft of 3/8 ID 210 ft of 3/8 ID |
Weight | 310 lb 140.6 kg |
Wetted Parts | Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon |
Voltage Tolerance Range (50/60 Hz) | |
200–240 V ac Nominal, 1 Phase | 195–253 V ac 195–253 V ac |
200–240 V ac Nominal, 3 Phase Delta | 195–253 V ac 195–253 V ac |
350–415 V ac Nominal, 3 Phase Wye (200–240 V ac Line-to-Neutral) | 338–457 V ac 338–457 V ac |
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose. | |
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used, but will have 25% less heat capacity. |
Tilbehør
-
Fusion Air Purge
For high output spray polyurethane foam and polyurea applications
-
Graco InSite
Sends Reactor data to your smart phone, tablet or computer.
-
Probler P2
For high output spray polyurethane foam and polyurea applications
-
Reactor Heated Hose
For Reactor proportioners
-
T1, T2 and T3 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Twistork Agitators
For mixing fluids in closed drums
Tilknyttede produkter
-
Reactor 2 E-30
Next generation technology for spray foam insulation and polyurea
-
Reactor 2 E-30i
Turnkey system for spray foam insulation and coating - applies up to 30 lb (13.6 kg) per minute
-
Reactor 2 E-XP2i
Turnkey system for polyurea waterproof coating and lining - applies up to 2 gal (7.6 liters) per minute
-
Reactor A-25
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
-
Reactor E-10hp
Entry-level system for pure and hybrid polyurea coatings
-
Reactor E-XP1
For polyurea coatings - applies up to 2 gal (7.6 liters) per minute