Graco Inc.

Hydra-Cat a rapporto fisso  Dosatore meccanico

Il design di abbassatore a più pompe dosa in modo preciso materiali bicomponente

Dove comprareRichiesta di informazioni
Condividi |

I dosatori Hydra-Cat a rapporto fisso pompano con precisione materiali multicomponente alimentando due o tre pompanti positivi mediante un normale motore pneumatico. Questo garantisce che la velocità e la lunghezza della corsa di tutti gli abbassatori della pompa siano identiche, fornendo un dosaggio costante.

I modelli con due abbassatori di misura identica forniscono forze di pompaggio bilanciate che impediscono l’usura prematura della guarnizione. I modelli con tre abbassatori della pompa e cilindri di varie misure possono essere scelti per fornire un’ampia gamma di rapporti di miscelazione.

Volete aggiornare la vostra Hydra-Cat? Cercate nella linea di spruzzatori multicomponente XP Graco.

  • Abbassatori per carichi pesanti resistenti all’usura e durevoli
  • Le varie configurazioni di abbassatore della pompa consentono un’ampia gamma di rapporti di miscelazione
  • L’abbassatore a due pompe offre un rapporto di miscelazione 1:1 costante
  • Il design a tre abbassatori della pompa fornisce rapporti di miscelazione superiori a 1:1 per un pompaggio equilibrato
  • Le guarnizioni in PTFE sono standard sugli abbassatori Hydra-Cat
Visualizza i valori in unità metriche. Visualizza i valori in unità USA.

President Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
0.3–0.7 MPa, 3–7 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 210 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 210 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, Tungsten carbide, fluoroelastomer
303 stainless steel, Tungsten carbide, fluoroelastomer
Sound, Tested in accordance with ISO 9614–2.
Sound pressure levels (dBa), (Input air pressures at 15 cycles/min.)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
Sound power levels (dBa), (Input air pressures at 15 cycles/min.)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. Xper minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.

Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
280–700 kPa, 2.8–6.37 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 207 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 207 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, tungsten carbide, fluoroelastomer
303 stainless steel, tungsten carbide, fluoroelastomer
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.