- Facile da utilizzare e mantenere
- Il design affidabile riduce i tempi di fermo e i costi di riparazione
- Configurazioni di pacchetto multiplo per adattarsi alle vostre applicazioni specifiche
- Affidabili motori pneumatici Monark e President
- Provati e resistenti
Monark 23:1, President 30:1 e 46:1 Pacchetti con supporto pneumatico e airless
Pacchetti per spruzzatori airless e con supporto pneumatico per rivestimenti bicomponente
Scegliete uno dei pacchetti per spruzzatura pronti per l’uso Graco in varie configurazioni di montaggio per soddisfare tutte le applicazioni airless e con supporto pneumatico.
Manuali
- 307619aa , Pompe Monark e President Hydra-Spray [altre lingue]
- 306706Y, STATIONARY AIRLESS PAINT SPRAYER, 30:1 President Hydra–Spray, Instructions–Parts List, English (Solo inglese)
- 306981ac , Pompe President e Monark Hydra-Spray [altre lingue]
- 308200D - Stainless Steel Check-Mate 200 Pumps, English (Solo inglese)
- 190903H, 2:1 Std. EU-Declaration of Conformity (Solo inglese)
- 192488G, 15:1 Monark Pump, 30:1 President, 23:1 Monark, EU-Declaration of Conformity (Solo inglese)
| Monark and President Pumps | |
|
U.S.
Metric
|
|
| Model 239140 SST President | |
| Ratio |
46:1
46:1
|
| Maximum fluid working pressure |
4600 psi
32 MPa, 317 bar
|
| Maximum air input pressure |
100 psi
0.7 MPa, 7 bar
|
| Fluid flow at 60 cycles per |
0.55 gpm
2.1 liters/min
|
| Maximum pump operating temperature |
180°F
82°C
|
| Weight |
approx. 24 lb
11 kg
|
| Wetted parts |
AISI 304, 316, 440C, and 17–4 PH grades of stainless steel; tungsten carbide; PTFE; leather
AISI 304, 316, 440C, and 17–4 PH grades of stainless steel; tungsten carbide; PTFE; leather
|
| Model 223596 CST Monark | |
| Ratio |
23:1
23:1
|
| Maximum fluid working pressure |
2760 psi
19 MPa, 190 bar
|
| Maximum air input pressure |
120 psi
0.8 MPa, 8 bar
|
| Fluid flow at 60 cycles per |
0.4 gpm
1.5 liters/min
|
| Maximum pump operating temperature |
180°F
82°C
|
| Weight |
approx. 24 lb
11 kg
|
| Wetted parts |
carbon steel; AISI 304, 316, 420, 440C, and 17–4 PH grades of stainless steel; chrome; chrome and zinc plating; tungsten carbide; PTFE; leather
carbon steel; AISI 304, 316, 420, 440C, and 17–4 PH grades of stainless steel; chrome; chrome and zinc plating; tungsten carbide; PTFE; leather
|
| Model 237958 SST Monark | |
| Ratio |
23:1
23:1
|
| Maximum fluid working pressure |
3450 psi
24 MPa, 238 bar
|
| Maximum air input pressure |
150 psi
1.0 MPa, 10 bar
|
| Fluid flow at 60 cycles per |
0.4 gpm
1.5 liters/min
|
| Maximum pump operating temperature |
180°F
82°C
|
| Weight |
approx. 24 lb
11 kg
|
| Wetted parts |
AISI 304, 316, 440C, and 17–4 PH grades of stainless steel; tungsten carbide; PTFE; leather
AISI 304, 316, 440C, and 17–4 PH grades of stainless steel; tungsten carbide; PTFE; leather
|
| Sound Pressure Levels (dBa) *measured at 1 meter from unit | |
|
Input Air Pressures at 15 cycles per minute
Input Air Pressures at 15 cycles per minute
|
|
| Air Motor |
40 psi (0.28 MPa, 2.8 bar)
100 psi (0.7 MPa, 7 bar)
|
| President |
73.6 dB(A)
80.9 dB(A)
|
| Monark |
62.6 dB(A)
63.9 dB(A)
|
| Sound Power Levels (dBa) *tested in accordance with ISO 9614–2 | |
|
Input Air Pressures at 15 cycles per minute
Input Air Pressures at 15 cycles per minute
|
|
| Air Motor |
40 psi (0.28 MPa, 2.8 bar)
100 psi (0.7 MPa, 7 bar)
|
| President |
87.4 dB(A)
94.6 dB(A)
|
| Monark |
69.5 dB(A)
71.0 dB(A)
|
