Graco Inc.

Pistole a flusso in linea 

Per il controllo preciso di sigillanti e collanti a bassa viscosità

Dove comprare

Impugnature:

  • Sigillatori PVC con additivi plastici o di vetro
  • Fluidi ad alta e bassa abrasività
  • Materiali a base di solvente e ad acqua
  • Gran parte dei fluidi fino a 150.000 centipoise

  • Perfette per erogare su superfici orizzontali
  • Sicura del grilletto e gancio selezionabili per la comodità dell’operatore
  • Adatta a ugelli filettati o flangiati per varie esigenze di erogazione
  • Il modello 204355 è dotato di un design leggero e resistente
  • Il modello 240199 ha la forza di attivazione e il peso più bassi della sua classe

Ultra-Lite In-Line Flow Gun
Maximum working pressure
3400 psi
23.4 MPa, 234 bar
Maximum temperature
120°F
49°C
Flow rate at 2000 psi (14 MPa, 138 bar)*
Model 240–199: 158 oz/min
4.5 kg/min
Model 240–200: 154 oz/min
4.4 kg/min
4.4 kg/min
Outlet port size
1/4 npt(f) and flange
1/4 npt(f) and flange
Inlet port size
1/4 npt(f)
1/4 npt(f)
Dry weight
Model 240–199: 11.6 oz
325 gm
Model 240–200: 11.6 oz
325 gm
325 gm
Length
5.9 in
15.0 cm
Width
2.6 in
6.6 cm
Thickness
0.85 in
2.16 cm
Pressure vessel material
Aluminum
Aluminum
Pressure vessel ID
0.25 in
6.4 mm
Gun seat diameter
Model 240–199: 0.125 in
3.2 mm
Model 240–200: 0.203 in
5.2 mm
5.2 mm
Needle seat type
Model 240–199: Carbide ball
Model 240–199: Carbide ball
Model 240–200: 7 Tapered carbide
Inlet/outlet angle
20°
20°
Trigger force – breakaway @ 1000 psi (7 MPa, 69 bar)
Model 240–199: 1.6 lb
0.73 kg
Model 240–200: 3.8 lb
1.72 kg
1.72 kg
Trigger force – breakaway @ 2000 psi (14 MPa, 138 bar)
Model 240–199: 2.2 lb
1.0 kg
Model 240–200: 7.3 lb
3.31 kg
3.31 kg
Trigger force – sustaining
Model 240–199: 3.2 lb
1.45 kg
Model 240–200: 2.8 lb
1.27 kg
1.27 kg
Wetted parts
Aluminum, stainless steel, carbide, polyethylene, CV75
Aluminum, stainless steel, carbide, polyethylene, CV75
CV75 is a registered trademark of the International Seal Co., Inc.
* Flow rates were measured using PVC sealer dispensed through a 1/8 in. diameter orifice nozzle and z-swivel connected to inlet. Actual flow rates will vary depending on material type, fluid pressure, nozzle size, and system configuration.