- ３種類の圧力タイプを用意しています。: 3500、5000および7250 psi (241、345 および 500 バール)
- 保護コーティング材用の標準的な混合比率を用意しています: 1:1, 2:1, 2.5:1, 3:1, 4:1
- スタンド式または壁取り付け式システムをご用意
- 標準XPポータブル・カートに取り付け
XP-h油圧プルーラルコンポーネントスプレーヤー ２液式塗装が簡単でお手頃価格に
油圧パワー、性能、そしてコスト削減をもたらす効率のために
特許取得済みXP比率技術を備えた、グラコ XP-h油圧プルーラルコンポーネントスプレーヤーは車載式の油圧パワーを備えたトラック、パレット、トレーラー、平台装置などに最適です。* OEMの道路標示用途に最適です。 システムの油圧モーターは、グラコ XP50 および XP70スプレーヤーで採用されているNXT 6500エアモーターの圧力性能に適合するように、最適化・定格化されています。
*油圧パワーはお客様側で別途用意
リソース・タブにあるROI（投資効果）計算機で、どのくらい節約できるかをご確認ください。
マニュアル
- 3A1043N - XP Proportioners, Instructions-Parts, Japanese [その他の言語]
- 334914B GH Power Pack, Instructions-Parts, English (英語のみ)
- 312296K, XTR 5 および XTR 7 Airless Spray Gun, 取扱説明書、部品、 日本の [その他の言語]
- 3A0590M, Mix Manifold, Instructions-Parts, English [その他の言語]
- 3A0421A - Ratio Check Kit, Instructions-Parts, English (英語のみ)
- 309852E -Reactor Circulation and Return Tube Kits, English (英語のみ)
- 310863N, Feed and Solvent Flush Kits, Instruction - Parts, English [その他の言語]
- 312458ZAG, Xtreme 下部, 説明書 – 部品一覧, 日本の [その他の言語]
- 311486D - DataTrak Conversion Kit, Instructions-Parts, English [その他の言語]
- 313391A, Merkur Pump Assembly, Instructions/Parts, Japanese [その他の言語]
- 312769F, Feed Pump Kits, XM, XP70, Instructions-Parts, US English (英語のみ)
- 312747L - Double Wall Hopper, Instructions-Parts, English [その他の言語]
3A1043N - XP Proportioners, Instructions-Parts, Japanese
312296K, XTR 5 および XTR 7 Airless Spray Gun, 取扱説明書、部品、 日本の
3A0590M, Mix Manifold, Instructions-Parts, English
310863N, Feed and Solvent Flush Kits, Instruction - Parts, English
312458ZAG, Xtreme 下部, 説明書 – 部品一覧, 日本の
311486D - DataTrak Conversion Kit, Instructions-Parts, English
313391A, Merkur Pump Assembly, Instructions/Parts, Japanese
資料
| XP and XP-h Proportioners | |
| Maximum Fluid Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
| Maximum Air/Hydraulic Oil Working Pressure | See Models section in instruction manual. See Models section in instruction manual. |
| Combined Fluid Output (cc/cycle) | See Models section in instruction manual. See Models section in instruction manual. |
| Pressure Ratio | See Models section in instruction manual. See Models section in instruction manual. |
| Fluid Flow at 40 cpm | See Models section in instruction manual. See Models section in instruction manual. |
| Hydraulic Fluid Consumption (XP-h models only) | 0.2 gallons per cycle 0.76 liters per cycle |
| Air inlet size | 3/4 npsm(f) 3/4 npsm(f) |
| Maximum air pressure supply to the system | 175 psi 12 bar, 1 MPa |
| Fluid pump inlets without hoppers | 1-1/4 in. npsm(m) 1-1/4 in. npsm(m) |
| Fluid gauge manifold outlets | 1/2 in. npt(f) 1/2 in. npt(f) |
| Fluid mix manifold inlets | 1/2 in. npt(f) ball valves 1/2 in. npt(f) ball valves |
| Mix manifold material outlet | 1/2 in. npt(f) 1/2 in. npt(f) |
| Maximum feed pressure from remote source | 250 psi 17 bar, 1.7 MPa |
| Sound pressure | 86 dBA at 100 psi 7 bar, 0.7 MPa |
| Sound power | 98 dBA at 100 psi 7 bar, 0.7 MPa |
| Maximum Storage Time | 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) 5 years (To maintain original performance, replace soft seals after 5 years of inactivity.) |
| Maximum Lifetime | Indefinite with recommended maintenance and periodic rebuilds for critical parts. Indefinite with recommended maintenance and periodic rebuilds for critical parts. |
| Power Efficiency Factor (XP70) | 75 cu. ft compressed air/1 gallon sprayed material at 100 psi 2.12 m³ compressed air/1 liter sprayed material at 7 bar (0.7 MPa) |
| Air consumption per 1 gallon (3.78 l) of flow | |
| XP70 | 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) 75 scfm at 100 psi/gpm (2.12 m³/min at 7 bar, 0.7 MPa) |
| XP50 | 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) 60 scfm at 100 psi/gpm (1.7 m³/min at 7 bar, 0.7 MPa) |
| XP35 | 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) 50 scfm at 100 psi/gpm (1.42 m³/min at 7 bar, 0.7 MPa) |
| Filtration | |
| Air inlet filtration | 40-micron filter/separator included 40-micron filter/separator included |
| XP pump outlets | 30 mesh 30 mesh |
| XTR Spray Gun | 60 mesh 60 mesh |
| Fluid Viscosity Range | |
| Gravity feed with 7 gallon (26 liter) hoppers | 200 to 20,000 cps (pourable) 200 to 20,000 cps (pourable) |
| Pressure feed | Any viscosity that will not require feed pressure more than 15% of outlet pressure Any viscosity that will not require feed pressure more than 15% of outlet pressure |
| Environmental Rating (Indoor/outdoor) | |
| Hazardous Areas | EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. EX II 2 G c IIA T2, NOTE: XP-h pump packages (284xxx) are not Ex rated. |
| Ambient Temperature Range | |
| Operating | 40-130°F 4-54°C |
| Storage | 30-160°F -1-71°C |
| Maximum Fluid Temperature | 160°F 71°C |
| Wetted materials | |
| Housings and manifolds | Carbon steel with electroless nickel plating Carbon steel with electroless nickel plating |
| Miscellaneous parts | Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics Plated carbon steel, stainless steels, carbide, acetal, UHM-WPE, nylon, PTFE solvent resistant plastics |
| Pump packings | Carbon filled PTFE, proprietary UHMWPE Carbon filled PTFE, proprietary UHMWPE |
| Flush pump suction tube | Aluminum Aluminum |
| Hoses | Nylon core Nylon core |
| Weight | |
| Full XP35, XP50, or XP70 System with heaters, solvent flush pump, and hoppers | 575 lb 261 kg |
| Full XP-h System with heaters, solvent flush pump, and hoppers | 600 lb 273 kg |
| Bare XP35, XP50, or XP70 system with no heaters, solvent flush pump, or hoppers | 425 lb 193 kg |
| Bare XP-h System with no heaters, solvent flush pump, or hoppers | 450 lb 204 kg |
| XP35, XP50, or XP70 Pump only | 286 lb 130 kg |
| XP-h Pump only | 290 lb 132 kg |
